AD: Pacific Aerospace Limited Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.10.24

Airborne-NextGen-06.11.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Sat, Nov 06, 2021

AD: Pacific Aerospace Limited Airplanes

AD 2021-21-11 Requires Inspecting The Engine Mount, The Temperature Probe, And The Reversing Cable For Damage

The FAA is adopting a new airworthiness directive (AD) for certain Pacific Aerospace Limited Model 750XL airplanes.

This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as insufficient clearance between the engine mount, the Beta control rod, and the inter-turbine temperature (ITT) sensing probe that could lead to chafing damage. This AD requires inspecting the engine mount, the temperature probe, and the reversing cable for damage, and taking any necessary corrective actions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective December 10, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain serial-numbered Pacific Aerospace Limited Model 750XL airplanes. The NPRM published in the Federal Register on July 28, 2021 (86 FR 40381). The NPRM was prompted by MCAI originated by the Civil Aviation Authority (CAA), which is the aviation authority for New Zealand. The CAA of New Zealand has issued AD DCA/750XL/35, effective date February 7, 2019 (referred to after this as “the MCAI”), to correct an unsafe condition for certain Pacific Aerospace Limited Model 750XL airplanes.

The MCAI states:

DCA/750XL/35 is prompted by a review of the engine installation procedures, which identified that the clearance between the engine mount, the Beta control rod and the inter-turbine temperature (ITT) sensing probe could be insufficient and result in chafing damage. The [CAA] AD is issued to introduce the instructions in Pacific Aerospace Mandatory Service Bulletin (MSB) PACSB/XL/102 issue 2, dated 5 November 2018.

You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0604.

FMI: www.regulations.gov

Advertisement

More News

ANNouncement: Now Accepting Applications For Oshkosh 2024 Stringers!!!

An Amazing Experience Awaits The Chosen Few... Oshkosh, to us, seems the perfect place to get started on watching aviation recover the past couple of years... and so ANN is putting>[...]

Aero-News: Quote of the Day (06.13.24)

“NBAA has a tremendous responsibility to the business aviation industry, and we are constantly collaborating with them. Our flight departments, professionals and aircraft own>[...]

ANN's Daily Aero-Term (06.13.24): Dead Reckoning

Dead Reckoning Dead reckoning, as applied to flying, is the navigation of an airplane solely by means of computations based on airspeed, course, heading, wind direction, and speed,>[...]

ANN's Daily Aero-Linx (06.13.24)

Aero Linx: Vertical Aviation Safety Team (VAST) We are a public–private initiative to enhance worldwide flight operations safety in all segments of the vertical flight indust>[...]

ANN FAQ: How Do I Become A News Spy?

We're Everywhere... Thanks To You! Even with the vast resources and incredibly far-reaching scope of the Aero-News Network, every now and then a story that should be reported on sl>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC