NASA Aims For May '06 Shuttle Launch | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.03.24

Airborne-NextGen-06.04.24

Airborne-Unlimited-06.05.24 Airborne-AffordableFlyers-06.06.24

Airborne-Unlimited-06.07.24

Sun, Oct 16, 2005

NASA Aims For May '06 Shuttle Launch

Foam Issue Resolved, But Will Michoud Be Ready?

With a fix now in place for the ongoing foam insulation issue, NASA has announced a goal of returning the space shuttle to flight by May of 2006 -- in time for a planned flight to the International Space Station. However, the plan depends on how quickly the agency can return to full operations at its hurricane-damaged tank assembly facility outside New Orleans.

"We have not set an official launch date," said shuttle program manager Wayne Hale at a news conference Friday, as reported in the Houston Chronicle. Hale then added "it appears a May window is something we can work toward."

The launch window that would allow the shuttle to rendezvous with the ISS runs from May 3 to May 23. A flight within this timeframe would occur ten months after the shuttle program was grounded following the July launch of the shuttle Discovery, during which new problems surfaced with the foam insulation blamed for the February 2001 loss of Columbia.

It appears the foam problem is resolved, however, as NASA previously announced an improved foam application procedure will be utilized on the tank used for the May '06 flight. As was reported in Aero-News, the new method will reduce the amount of insulation applied to a section of the external tank known as the PAL, or protuberance airload, ramp.

Richard Gilbrech, head of the NASA team working to find what caused sections of foam to drop from Discovery's tank, said one likely cause of foam loss during the flight was additional, repeated contact with the foam by workers during assembly.

Workers paying special attention to foam application issues may have inadvertently created new problems, according to Gilbrech, although he stressed there is no evidence of negligence.

The timing of the May '06 flight, the second in the "Return To Flight" test sequence and also utilizing Discovery, depends on how soon NASA's Michoud Assembly Facility can return to full operations following damage caused by Hurricane Katrina. The external tank slated to fly with Discovery is now at the Michoud plant, which is currently operating with only 1/4 of its regular complement of 2000 workers.

"We will have lost equivalent of three months' work based on the effects of hurricanes," Hale said. He added the full workforce -- many of which lost their homes to the hurricane -- should be back to work at Michoud by December.

FMI: www.nasa.gov

Advertisement

More News

Archer Gains Part 135 Air Carrier & Operator Certificate

With Certification In-Hand, the Story Continues Archer has been given some very good news as of late, now having been granted their operator certificate from the FAA. Even better f>[...]

Airborne 06.10.24: Gone West-Bill Anders, M700 FIKI, TFR Corrections

Also: Virgin Galactic, TBMOPA’s European Convention, B-29 Doc and B-25 Berlin Express, Fairchild XNQ-1 An astronaut who was part of what was then mankind's greatest adventure>[...]

Airborne 06.10.24: Gone West-Bill Anders, M700 FIKI, TFR Corrections

Also: Virgin Galactic, TBMOPA’s European Convention, B-29 Doc and B-25 Berlin Express, Fairchild XNQ-1 An astronaut who was part of what was then mankind's greatest adventure>[...]

Aero-News: Quote of the Day (06.11.24)

“For months, ALPA has been sounding the alarm on the ongoing efforts by some aircraft manufacturers to remove pilots from the flight deck and replace them with automation. To>[...]

FlightHorizon Chosen for Osage Nation's Skyway36 Droneport

Skyway Range Begins Planning for Traffic Early On Skyway 36 is shaping up to be a handy UAV development location, boasting a 3,000-foot runway a short hop from downtown Tulsa, Okla>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC