Columbia, MO Airport Reopens To GA And Passenger Service | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Sat, Apr 20, 2019

Columbia, MO Airport Reopens To GA And Passenger Service

Emergency Runway Alterations Completed, But Questions Remain About Who Will Pay For Them

Emergency runway alterations have been completed at Columbia (MO) Regional Airport (KCOU), reopening the field to both GA and scheduled passenger service.

The airport had been closed a week ago Monday after airport officials say two of the three airlines that serve the airport suspended operations because of problems with the main runway. The crown of the main runway at the intersection with the secondary runway was causing rough landings, the airlines said. The crown was milled down over the course of the last week and the runway was repaved.

The problems came to light when the 6,500-foot main runway was closed on April 1 as the city began a $6 million project to refurbish and lengthen it. The crossing runway was rebuilt two years ago and lengthened to 5,500 feet, and was being used by the airlines while construction was being done on the main runway.

The milling and repaving project cost about $500,000, and The Columbia Daily Tribune reports that interim City Manager John Glascock said that the FAA would be required to pay for the repairs. But FAA regional spokeswoman Elizabeth Cory said in an email to the paper that federal funding is not automatic, and an AIP grant would not cover the full cost of the project.

In the email sent to the paper, Cory raised questions about Glascock's assumption that the FAA would pay for the modifications. But Glascock told the board of Regional Economic Development Inc. that the crown is necessary to drain water off the runway, and was built to federal specifications. Cory said that the FAA does not require drainage crowns to continue through a runway intersection. "FAA design standards call for designers to, 'Provide a smooth transition between intersecting pavement surfaces as well as adequate drainage of the intersection,'" she wrote.

She also questioned why the crown had suddenly become a problem 18 months after the project was complete.

The intersection was created when the secondary runway was extended. That runway had previously terminated where it joined the main runway at a skewed angle, according to the report.

FMI: Source report

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC