Sierra FJ44 Super II And Super S-II Gain Canadian STC Approval | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Fri, Nov 20, 2009

Sierra FJ44 Super II And Super S-II Gain Canadian STC Approval

Re-Engining Mods Now Approved In More Than 33 Countries

Canada’s Department of Transport has amended STC approval number SA06-54 for Sierra Industries, adding the Citation 550 and S550 models to their existing Williams FJ44 engine upgrades for Cessna Citation 500 and 501 aircraft. Since the initial 2002 certification, Sierra’s FJ44 modifications have been applied to 54 aircraft. The high-performance fleet of Citation I, II and S-II aircraft have amassed a total of more than 50,000 hours of Williams engine operation to date.

Williams International’s 3rd-generation engine technology increases efficiency, reducing fuel burn, operating cost and carbon emissions. Since the 2002 introduction of the FJ44 Eagle II, Sierra’s FJ44 fleet has reduced worldwide carbon emissions by an estimated 10,000 tons. The aircraft also enjoy substantial performance improvements, ranging from 35 to 50 knot cruise speed increases and 300 to 400 NM greater range to dramatically improved climb performance. In fact, all 4 models can achieve FL430 at gross weight in under 25 minutes from any North American airport, making them ideal candidates for remote Canadian locations and high altitude airfields.

Williams FJ44

Building on Sierra’s 25 years of Citation modification history and 15 years of experience in Citation re-engining, Sierra’s current re-engining lineup includes the highly successful FAA and EASA-approved FJ44-2A Eagle II and Stallion and the FAA-approved FJ44-3A Super II and Super S-II modifications. Supporting these modifications with their extensive in-house manufacturing capabilities, Sierra is among the largest holders of FAA Parts Manufacturing Approvals (PMA) in the southwestern US.

Sierra recently announced new incentives for advance booking of 2010 modifications, reducing their 2009 pricing. FJ44-2A Stallion upgrades start at under $1.55 million and FJ44-3A Super II and Super S-II positions are available starting under $1.75 million. Trade-in allowances are also available on existing Pratt engines with time remaining.

FMI: www.sijet.com

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC