STC For Hawker 400XP, Beechjet 400A LPV Nearly Complete | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.17.25

AirborneNextGen-
11.11.25

Airborne-Unlimited-11.12.25

Airborne-FltTraining-11.13.25

AirborneUnlimited-11.14.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Sun, Dec 12, 2010

STC For Hawker 400XP, Beechjet 400A LPV Nearly Complete

Would Give Airplanes Access To Over 2300 LPV Approaches

A team working towards obtaining an STC upgrade for Localizer Performance with Vertical Guidance (LPV) utilizing Wide Area Augmentation System (WAAS) for the Hawker 400XP and Beechjet 400A for says it expects approval in mid-December.


Hawker 400XP File Photo

Cutter Aviation, working with Rockwell Collins, said Thursday that the STC is projected to be available after December 20, 2010, and Cutter is already working with operators to discuss equipment requirements and scheduling for the upgrade.

The LPV STC will allow the Hawker 400XP and Beechjet 400A to take advantage of the more than 2300+ LPV approaches available with minimum decision heights as low as 200 feet. The access to LPV minimums means greater accessibility to more places, and in some cases, a reduction in annoying and expensive delays due to ground or arrival holds. The new generation equipment also allows for more efficient and smoother approach profiles.


Beechjet 400A File Photo

Cutter Aviation located at Phoenix Sky Harbor Int'l Airport in Phoenix, AZ provided the aircraft, performed the installation and engineering, modified existing equipment, installed the new equipment, performed system testing and flight testing, prepared the necessary drawing packages, and submitted the STC project for final approval by the FAA. Rockwell Collins provided the equipment, proprietary data, technical interface documentation, and safety assessment documentation.

Cutter Aviation will be offering the LPV STC Upgrade from its service centers in Phoenix, AZ at Phoenix Sky Harbor International Airport (KPHX); Albuquerque, NM at Albuquerque International Sunport (KABQ); and Dallas, TX at Collin Co. Regional Airport at McKinney/North Dallas (KTKI).

FMI: www.cutteraviation.com/beechjetLPV

Advertisement

More News

ANN's Daily Aero-Term (11.19.25): Option Approach

Option Approach An approach requested and conducted by a pilot which will result in either a touch-and-go, missed approach, low approach, stop-and-go, or full stop landing. Pilots >[...]

Aero-News: Quote of the Day (11.19.25)

"Emirates is already the world's largest Boeing 777 operator, and we are expanding our commitment to the program today with additional orders for 65 Boeing 777-9s. This is a long-t>[...]

NTSB Final Report: Sting Sport TL-2000

(Pilot) Reported That There Was A Sudden And Violent Vibration Throughout The Airplane That Lasted Several Seconds Analysis: The pilot was returning to his home airport at an altit>[...]

Aero-News: Quote of the Day (11.20.25)

“This recognition was evident during the TBMOPA Annual Convention, where owners and operators clearly expressed their satisfaction with our focus on customer service, and enc>[...]

ANN's Daily Aero-Term (11.20.25): Overhead Maneuver

Overhead Maneuver A series of predetermined maneuvers prescribed for aircraft (often in formation) for entry into the visual flight rules (VFR) traffic pattern and to proceed to a >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC