NTSB Issues Urgent Safety Recommendation On Sikorsky S-76 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Nov 19, 2005

NTSB Issues Urgent Safety Recommendation On Sikorsky S-76

Recommends FAA Require Checks Into MRA Internal Leakage

The National Transportation Safety Board (NTSB) has issued two recommendations that the FAA immediately require Sikorsky S-76 operators conduct immediate checks into leakage in the internal assemblies of the helicopters' main rotor actuators.

The NTSB's specific recommendations are as follows:

(Urgent A-05-33)

  1. Conduct an immediate internal leakage test of all main rotor actuators with more than 500 hours since new and/or overhaul;
  2. Conduct subsequent recurring tests at a period not to exceed 500 hours;
  3. Report the test results to the Federal Aviation Administration and/or Sikorsky; and
  4. Correct any problems as necessary.

(Urgent A-05-35)

The NTSB recommends the FAA require Sikorsky S-76 helicopter operators to:

  1. Conduct immediate visual and laboratory examinations of hydraulic fluid and filter elements in hydraulic systems with actuators with more than 500 hours since new and/or overhaul for plasma flakes or other contamination that exceeds the manufacturers' allowable limits of concentration and size;
  2. Conduct subsequent recurring tests at a period not to exceed 500 hours;
  3. Report findings of contamination and flakes to the Federal Aviation Administration and/or Sikorsky and
  4. Correct any problems as necessary.

The NTSB also recommends the FAA direct the principal operations inspectors of all Sikorsky S-76 helicopter operators to reemphasize the importance of, and requirement for, a preflight check of control movement smoothness and flight control 'stick-jump' at every engine start.

FMI: View the complete recommendation letter (PDF)

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Airborne 05.06.24: Gone West-Dick Rutan, ICON BK Update, SpaceX EVA Suit

Also: 1800th E-Jet, Uncle Sam Sues For Landing Gear, Embraer Ag Plane, Textron Parts A friend of the family reported that Lt. Col. (Ret.) Richard Glenn Rutan flew west on Friday, M>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC