AD: Leonardo S.p.a. Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.02.25

Airborne-NextGen-06.03.25

AirborneUnlimited-06.04.25

Airborne-AffordableFlyers-06.05.25

AirborneUnlimited-06.06.25

Sat, Oct 23, 2021

AD: Leonardo S.p.a. Helicopters

AD 2021-20-18 Requires Removing And Reinstalling The (Affected) Windows

The FAA is adopting a new airworthiness directive (AD) for certain serial-numbered Leonardo S.p.a. Model AW119 MKII helicopters.

This AD was prompted by the discovery that the passenger cabin windows (windows) on a batch of helicopters were improperly installed during production. This AD requires removing and reinstalling the windows. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective November 3, 2021.

Supplementary Information: EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2018-0270, dated December 12, 2018 (EASA AD 2018-0270), to correct an unsafe condition for Leonardo S.p.A. Helicopters, formerly Finmeccanica S.p.A., AgustaWestland S.p.A., Agusta S.p.A.; and AgustaWestland Philadelphia Corporation, formerly Agusta Aerospace Corporation, Model AW119MKII helicopters, serial numbers 14831, 14834, 14838, 14840, 14841, 14842, 14843, 14844, 14901, 14904, 14905, 14906, and 14918. EASA advises that during maintenance of a helicopter, removal of passenger windows could only be accomplished with difficulty. EASA further advises that subsequent investigation identified a batch of helicopters on  which passenger windows have been improperly installed during production. According to Leonardo Helicopters service information, an investigation concluded that the gasket was bonded to the window (or on both sides) instead of to the door frame.

This condition, if not corrected, could prevent the jettisoning of the windows, possibly preventing the evacuation of passengers during an emergency situation. Accordingly, EASA AD 2018-0270 requires removal and reinstallation of the passenger windows with the approved design data.

FMI: www.regulations.gov

Advertisement

More News

Citation Operators Get Another Flight Data Connection for QA

LinxUs System Adds Capabilities for Data-Driven Operators Textron Aviation announced another option for operators processing their post-flight data, adding interoperability with GE>[...]

ANN's Daily Aero-Linx (06.01.25)

Aero Linx: The de Havilland Moth Club Ltd The de Havilland Moth Club evolved from a belief that an association of owners and operators of Moth aeroplanes should be formed to create>[...]

NTSB Final Report: Bellanca 8GCBC

(Pilot) Inadvertently Applied Excessive Braking Action, And The Airplane Nosed Over Analysis: The pilot reported that, while landing at a remote, rough and uneven airstrip in a tai>[...]

Aero-News: Quote of the Day (06.01.25)

“MCADT is committed to rapidly integrating armed first-person view drones into the FMF, enhancing small-unit lethality and providing organic capabilities that warfighters cur>[...]

Classic Aero-TV: High-Speed Match-up - Venom and GE Rebirth A Legend

From 2017 (YouTube Edition): Major Engine Supplier Joins Forces With Small Aircraft Manufacturer… GE recently made an agreement with Venom Aircraft to supply engines for the>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC