AD: Sikorsky Aircraft Corporation Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Apr 21, 2021

AD: Sikorsky Aircraft Corporation Helicopters

AD 2021-08-18 Prompted By The Discovery That Certain Part Numbers Listed In AD 2021-04-16 Are Incorrect

The FAA is superseding Airworthiness Directive (AD) 2021-04-16 which applied to certain Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters.

AD 2021-04-16 required a one-time inspection of the landing gear for components with non-conforming threads and removal of any non-conforming threaded hinge pin and main landing gear (MLG) and nose landing gear (NLG) actuator pins. AD 2021-04-16 also prohibited installing certain part-numbered hinge and actuator pins on any helicopter. This AD requires the same actions but corrects erroneous part numbers. This AD was prompted by the discovery that certain part numbers listed in AD 2021-04-16 are incorrect. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective April 29, 2021

Supplementary Information: The FAA issued AD 2021-04-16, Amendment 39-21438 (86 FR 13631, March 10, 2021) (AD 2021-04-16), for Sikorsky Model S-92A helicopters with serial numbers (S/Ns) 920006 through 920334 inclusive. AD 2021-04-16 required a one-time inspection of the landing gear and the removal from service of certain serial-numbered threaded hinge pins part number (P/N) 92250-12281-101 and certain serial-numbered MLG and NLG actuator pins P/N 92250-12287-101 and 92250-12287-103. AD 2021-04-16 was prompted by the manufacturer discovering nonconforming threads, resulting in a life limit reduction on multiple landing gear components including threaded hinge pins and MLG and NLG actuator pins. The FAA issued AD 2021-04-16 to prevent failure of components on the MLG and NLG. The unsafe condition, if not addressed, could result in damage to the helicopter and reduced ability to control the helicopter during landing.

FMI: www.regulations.gov

Advertisement

More News

NTSB Prelim: Piper PA-23

Pilot Also Reported That Due To A Fuel Leak, The Auxiliary Fuel Tanks Were Not Used On June 4, 2025, at 13:41 eastern daylight time, a Piper PA-23, N2109P, was substantially damage>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: One Man’s Vietnam

From 2023 (YouTube Edition): Reflections on War’s Collective Lessons and Cyclical Nature The exigencies of war ought be colorblind. Inane social-constructs the likes of racis>[...]

ANN's Daily Aero-Linx (07.03.25)

Aero Linx: Colorado Pilots Association (CPA) Colorado Pilots Association was incorporated as a Colorado Nonprofit Corporation in 1972. It is a statewide organization with over 700 >[...]

ANN's Daily Aero-Term (07.03.25): High Speed Taxiway

High Speed Taxiway A long radius taxiway designed and provided with lighting or marking to define the path of aircraft, traveling at high speed (up to 60 knots), from the runway ce>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC