AD: McDonnell Douglas | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Sep 15, 2004

AD: McDonnell Douglas

AD NUMBER: 2004-18-15
MANUFACTURER:
McDonnell Douglas
SUBJECT: Airworthiness Directive 2004-18-15
SUMMARY: This amendment supersedes an existing airworthiness directive (AD), applicable to McDonnell Douglas transport category airplanes that currently requires a one-time detailed inspection to determine if wire segments of the wire bundle routed through the feed-through on the aft side of the flight engineer's station are damaged or chafed, and corrective actions if necessary. That AD also requires revising the wire bundle support clamp installation at the flight engineer's station. For certain airplanes, this amendment requires a new revision of the wire bundle support clamp installation, and modification of a certain wire bundle. This amendment also reduces the applicability in the existing AD. The actions specified by this AD are intended to prevent chafing of the wire bundle located behind the flight engineer's panel caused by the wire bundle coming in contact with the lower edge of the feed-through, and consequent electrical arcing, which could result in smoke and fire in the cockpit. This action is intended to address the identified unsafe condition.

FMI: www.avantext.com/DailyADIndex.ASP?AD=20041815

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC