AD: Williams International Co., L.L.C. Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Jul 06, 2022

AD: Williams International Co., L.L.C. Turbofan Engines

AD 2022-13-15 Prompted By A Report Of Cracks In The High-Pressure Turbine (HPT) Disk Posts

The FAA is adopting a new airworthiness directive (AD) for certain Williams International Co., L.L.C. (Williams) FJ44-2A, FJ44-2C, FJ44-3A, and FJ44-3A-24 model turbofan engines. 

This AD was prompted by a report of cracks in the high-pressure turbine (HPT) disk posts and failure of an HPT disk post, resulting in the contained fracture of an HPT disk post and blade. This AD requires removing the HPT disk, part number (P/N) 67093, from service before reaching defined cycle limits and replacing it with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective August 9, 2022. 

Supplementary Information: The FAA issued a supplemental notice of proposed rulemaking (SNPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Williams FJ44-2A, FJ44-2C, FJ44-3A, and FJ44-3A24 model turbofan engines. The SNPRM published in the Federal Register on April 14, 2022 (87 FR 22153). The SNPRM was prompted by a report of cracks in the HPT disk posts and failure of an HPT disk post, resulting in the contained fracture of an HPT disk post and blade. Subsequently, Williams notified the FAA that revised service information was available, which added additional serial-numbered FJ44-2A, FJ44-2C, and FJ44-3A model turbofan engines to the effectivity and updated the compliance time for replacing the HPT disk. In the SNPRM, the FAA proposed to require removing the HPT disk, P/N 67093, from service before reaching defined cycle limits and replacing it with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products. 

 FMI: www.regulations.gov 

Advertisement

More News

NTSB Prelim: Piper PA-23

Pilot Also Reported That Due To A Fuel Leak, The Auxiliary Fuel Tanks Were Not Used On June 4, 2025, at 13:41 eastern daylight time, a Piper PA-23, N2109P, was substantially damage>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: One Man’s Vietnam

From 2023 (YouTube Edition): Reflections on War’s Collective Lessons and Cyclical Nature The exigencies of war ought be colorblind. Inane social-constructs the likes of racis>[...]

ANN's Daily Aero-Linx (07.03.25)

Aero Linx: Colorado Pilots Association (CPA) Colorado Pilots Association was incorporated as a Colorado Nonprofit Corporation in 1972. It is a statewide organization with over 700 >[...]

ANN's Daily Aero-Term (07.03.25): High Speed Taxiway

High Speed Taxiway A long radius taxiway designed and provided with lighting or marking to define the path of aircraft, traveling at high speed (up to 60 knots), from the runway ce>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC