AD: Pacific Aerospace Limited Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Sat, Nov 06, 2021

AD: Pacific Aerospace Limited Airplanes

AD 2021-21-11 Requires Inspecting The Engine Mount, The Temperature Probe, And The Reversing Cable For Damage

The FAA is adopting a new airworthiness directive (AD) for certain Pacific Aerospace Limited Model 750XL airplanes.

This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as insufficient clearance between the engine mount, the Beta control rod, and the inter-turbine temperature (ITT) sensing probe that could lead to chafing damage. This AD requires inspecting the engine mount, the temperature probe, and the reversing cable for damage, and taking any necessary corrective actions. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective December 10, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain serial-numbered Pacific Aerospace Limited Model 750XL airplanes. The NPRM published in the Federal Register on July 28, 2021 (86 FR 40381). The NPRM was prompted by MCAI originated by the Civil Aviation Authority (CAA), which is the aviation authority for New Zealand. The CAA of New Zealand has issued AD DCA/750XL/35, effective date February 7, 2019 (referred to after this as “the MCAI”), to correct an unsafe condition for certain Pacific Aerospace Limited Model 750XL airplanes.

The MCAI states:

DCA/750XL/35 is prompted by a review of the engine installation procedures, which identified that the clearance between the engine mount, the Beta control rod and the inter-turbine temperature (ITT) sensing probe could be insufficient and result in chafing damage. The [CAA] AD is issued to introduce the instructions in Pacific Aerospace Mandatory Service Bulletin (MSB) PACSB/XL/102 issue 2, dated 5 November 2018.

You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0604.

FMI: www.regulations.gov

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC