AD 2021-19-06 Requires Inspecting Certain Carbon Brake Assemblies And Corrective Actions If Necessary

The FAA is superseding Airworthiness Directive (AD) 2007-02-13, which applied to certain Dornier Luftfahrt GmbH (type certificate currently held by RUAG Aerospace Services GmbH) Model Dornier 228-212 airplanes.

 AD 2007-02-13 required inspecting the landing gear carbon brake assembly. This AD requires inspecting certain carbon brake assemblies and corrective actions if necessary. This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the European Union Aviation Safety Agency (EASA) to correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as loose bolts and nuts on the landing gear carbon brake assembly. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 15, 2021.

Supplementary Information: The FAA invites you to send any written data, views, or arguments about this final rule. Send your comments to an address listed under ADDRESSES. Include “Docket No. FAA-2021-0726; Project Identifier 2019-CE-059-AD” at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this final rule because of those comments.

Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to https://www.regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this final rule.

FMI: www.regulations.gov