Williams International Receives EASA Certification of its FJ44-3AP Turbofan | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Thu, May 10, 2012

Williams International Receives EASA Certification of its FJ44-3AP Turbofan

First Installation Will Be On Nextant 400XT

EASA has awarded a type certificate to Williams International for its FJ44-3AP engine, an improved version of its popular FJ44-3A model. State-of-the-art aerodynamics and structural enhancements led to this new benchmark in thrust-to-weight ratio and fuel economy. Take-off thrust was increased 8% to 3052 pounds, cruise thrust was increased 13%, while weight was reduced 3% and cruise specific fuel consumption improved by 1.5%. The FJ44-3AP was certified by the FAA in May 2011. The engine will first be installed on the Nextant 400XT.

“I want to thank EASA for their strong support in achieving this milestone,” said Gregg Williams, Chairman, President & CEO of Williams International. “I am also very proud of our team for developing significant improvements to what was already a very good engine. The outstanding performance of the FJ44-3AP engine will lead to many new and improved airplanes.”

“The FJ44-3AP is also the first to receive EASA certification of a new proprietary feature we developed,” Williams added, “that converts into thrust the energy typically wasted pre-cooling engine bleed air for use in aircraft anti-icing systems. This feature, which enables much better performance in icing conditions, will be offered on Williams’ other commercial engines.”

The FJ44-3AP joined a comprehensive product line of FJ33 and FJ44 engines that covers the thrust spectrum from 1000 to 3600 pounds thrust. Two other new models are well along in development – the FJ44-1AP-21 will be certified later this year for use in the Cessna M2, and the FJ33-5 will be certified next year in support of the Cirrus and Diamond jets. All have rugged and efficient wide-sweep fans, health-monitoring FADEC controls, and low-emissions combustor technology.

The company says the FJ44-3AP engine incorporates durability improvements gleaned from over 7 million hours of operation of the 4300 FJ44 engines in service.

FMI: www.williams-int.com


Advertisement

More News

ANN's Daily Aero-Term (06.30.25): Ground Stop (GS)

Ground Stop (GS) The GS is a process that requires aircraft that meet a specific criteria to remain on the ground. The criteria may be airport specific, airspace specific, or equip>[...]

ANN's Daily Aero-Linx (06.30.25)

Aero Linx: Australian Transport Safety Bureau (ATSB) The Australian Transport Safety Bureau (ATSB) improves safety and public confidence in aviation, marine and rail transport thro>[...]

Aero-News: Quote of the Day (06.30.25)

“The Palo Alto stopover confirmed—yet again—that flight schools and aero-clubs are no longer just curious about electric training; they are ready to buy. In just >[...]

NTSB Final Report: ICON A5

Pilot’s Failure To Maintain Clearance From The Water While Flying At A Low Altitude Analysis: The flight of two airplanes was in cruise flight on a north heading about 50 ft >[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC