AD: Airbus Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.14.25

Airborne-NextGen-07.15.25

AirborneUnlimited-07.16.25

Airborne-FlightTraining-07.17.25

AirborneUnlimited-07.11.25

Fri, May 18, 2018

AD: Airbus Airplanes

AD NUMBER: 2018-10-05

PRODUCT: All Airbus Model A310 series airplanes.

ACTION: Final Rule.

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2016-23-01, which applied to  the aircraft listed above.

AD 2016-23-01 required repetitive detailed inspections for cracking around the fastener holes in certain areas of the wing top skin panels, supplemental repetitive ultrasonic inspections for cracking around the fastener holes in certain other areas of the wing top skin panels, and repair if necessary.

This AD adds an inspection and modification of the fastener holes of the wing top skin panels at a certain area. This AD also includes terminating action for certain inspections.

This AD was prompted by an evaluation by the design approval holder (DAH) which indicates that the wing top skin panel fastener holes at a certain area are also subject to widespread fatigue damage (WFD).

DATES: This AD is effective June 19, 2018.

COST: The FAA estimates that this AD affects 8 airplanes of U.S. registry.

The actions required by AD 2016-23-01, and retained in this AD, take about 8 work-hours per product, at an average labor rate of $85 per work-hour. Based on these figures, the estimated cost of the actions that are required by AD 2016-23-01 on U.S. operators to be $5,440, or $680 per product.

The FAA further estimates that it takes about 95 work-hours per product to comply with the basic requirements of this AD. Required parts will cost about $10,200 per product. The average labor rate is $85 per work-hour. Based on these figures, the estimated cost of this AD on U.S. operators to be $146,200, or $18,275 per product.

In addition, any necessary modification will take about 40 work-hours and require parts costing $10,000, for a cost of $13,400 per product.

FMI: AD

Advertisement

More News

ANN's Daily Aero-Term (07.15.25): Charted Visual Flight Procedure Approach

Charted Visual Flight Procedure Approach An approach conducted while operating on an instrument flight rules (IFR) flight plan which authorizes the pilot of an aircraft to proceed >[...]

Aero-News: Quote of the Day (07.15.25)

“When l became the Secretary of Defense, I committed to rebuild our military to match threats to capabilities. Drones are the biggest battlefield innovation in a generation, >[...]

ANN's Daily Aero-Linx (07.15.25)

Aero Linx: Stearman Restorers Association Welcome to the Stearman Restorers Association. The Stearman Restorers Association is an independent “Not for Profit” 501C-3 Co>[...]

NTSB Final Report: Kjelsrud Gary Kitfox

Airplane Exhibited A Partial Loss Of Engine Power When It Was About Halfway Down The Runway Analysis: The pilot of the experimental amateur-built airplane was departing from his pr>[...]

NTSB Prelim: Cessna A150L

The Flight Path Was Consistent With Low-Altitude Maneuvering On June 18, 2025, about 0922 mountain standard time, a Cessna A150L airplane, N6436F, was substantially damaged when it>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC