Aero-News: Quote of the Day (09.12.23) | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.14.25

Airborne-NextGen-07.15.25

AirborneUnlimited-07.16.25

Airborne-FlightTraining-07.17.25

AirborneUnlimited-07.11.25

Tue, Sep 12, 2023

Aero-News: Quote of the Day (09.12.23)

Aero-News: Quote of the Day

ANN's Quote of the Day usually derives from current news, though we reserve the right to pick quotes out of history that have a bearing on the day's events and issues.

Sometimes, you'll find them timely and in keeping with the content of the day's news... and sometimes, they'll just be thought-provoking.

Reader suggestions and comments are welcome... and if particularly intriguing, timely, or poignant, may themselves become future Quotes of the Day.

Let us hear from you, folks!

Aero-News Quote of the Day

“Our testing program for this issue is ongoing and focused on reviewing the various hole diameters and material thicknesses/types that were used to produce the laser-cut parts. These variables, as well as variations in manufacturing process parameters, can result in a marked difference in the potential for a crack to form in a given hole. We will prioritize testing and manufacturing of replacement parts based on these differences. We are also reviewing the metallurgy of the holes at the third-party test lab, in order to better understand the origin and cause of the observed cracks. From that, we will gain a greater understanding about these cracks and at what stages in the process they are formed (when cut, when dimpled, when riveted). We expect to receive those results soon, even before the full spectrum of overall testing is completed, and we will communicate that information when available.”

Source: From recent statements by Van's Aircraft as they deal with issues created by a supplier providing laser cut parts that failed to meet their specifications.

FMI: www.vansaircraft.com

Advertisement

More News

ANN's Daily Aero-Term (07.15.25): Charted Visual Flight Procedure Approach

Charted Visual Flight Procedure Approach An approach conducted while operating on an instrument flight rules (IFR) flight plan which authorizes the pilot of an aircraft to proceed >[...]

Aero-News: Quote of the Day (07.15.25)

“When l became the Secretary of Defense, I committed to rebuild our military to match threats to capabilities. Drones are the biggest battlefield innovation in a generation, >[...]

ANN's Daily Aero-Linx (07.15.25)

Aero Linx: Stearman Restorers Association Welcome to the Stearman Restorers Association. The Stearman Restorers Association is an independent “Not for Profit” 501C-3 Co>[...]

NTSB Final Report: Kjelsrud Gary Kitfox

Airplane Exhibited A Partial Loss Of Engine Power When It Was About Halfway Down The Runway Analysis: The pilot of the experimental amateur-built airplane was departing from his pr>[...]

NTSB Prelim: Cessna A150L

The Flight Path Was Consistent With Low-Altitude Maneuvering On June 18, 2025, about 0922 mountain standard time, a Cessna A150L airplane, N6436F, was substantially damaged when it>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC