AD: Engine Alliance Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Sep 25, 2019

AD: Engine Alliance Turbofan Engines

AD NUMBER: 2019-18-08

PRODUCT: All Engine Alliance (EA) GP7270 and GP7277 model turbofan engines.

ACTION: Final rule; request for comments.

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2019-16-04 for the products listed above.

AD 2019-16-04 required a visual inspection of the 1st-stage low-pressure compressor (LPC) rotor assembly, referred to after this as the “engine fan hub assembly,” for damage, a one-time eddy current inspection (ECI) of the engine fan hub blade slot bottom and blade slot front edge for cracks; and removal of parts if damage or defects are found. AD 2019-16-04 also required replacement of the engine fan hub blade lock assembly for certain GP7270 and GP7277 model turbofan engines.

This AD, for certain GP7270 and GP7277 model turbofan engines, reduces the compliance time for the initial ECI and requires repetitive ECIs of the engine fan hub blade slot bottom and blade slot front edge for cracks. This AD also retains the visual inspection requirements of the engine fan hub assembly for all GP7270 and GP7277 model turbofan engines.

This AD was prompted by an uncontained failure of the engine fan hub.

DATES: This AD is effective October 9, 2019. Comments must be received by November 8, 2019.

COST: The FAA estimates that this AD affects zero engines installed on airplanes of U.S. registry. Operators may incur the following costs in order to comply with this AD:

  • ECI: 20 work-hours × $85 per hour = $1,700 per engine.
  • Visual inspection: 1 work-hour × $85 per hour = $85 per engine
  • Replace fan hub blade lock assembly: Labor: 25 work-hours × $85 per hour = $2,125. Parts: $28,000. Cost per airplane $30,125.

On-Condition Costs

  • Replace engine fan hub assembly: 50 work-hours × $85 per hour = $4,250. Parts: $790,500. Cost per engine: $794,750
FMI: AD

Advertisement

More News

NTSB Final Report: Douglas A-4K

Pilot Applied Full Aft Stick And Nose-Up Trim, But The Airplane Remained On The Runway Analysis: The pilot reported that a preflight inspection and flight control checks revealed n>[...]

ANN FAQ: Q&A 101

A Few Questions AND Answers To Help You Get MORE Out of ANN! 1) I forgot my password. How do I find it? 1) Easy... click here and give us your e-mail address--we'll send it to you >[...]

Classic Aero-TV: PBY Catalina--From Wartime to Double Sunrise to the Long Sunset

From 2022 (YouTube Edition): Before They’re All Gone... Humankind has been messing about in airplanes for almost 120-years. In that time, thousands of aircraft representing i>[...]

ANN's Daily Aero-Term (07.01.25): Advanced Air Mobility (AAM)

Advanced Air Mobility (AAM) A transportation system that transports people and property by air between two points in the NAS using aircraft with advanced technologies, including el>[...]

ANN's Daily Aero-Linx (07.01.25)

Aero Linx: MQ-1B Predator The MQ-1B Predator is an armed, multi-mission, medium-altitude, long-endurance remotely piloted aircraft that is employed primarily as an intelligence-col>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC