ScaleBirds Updates Followers on P-36 Development | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.14.25

Airborne-NextGen-07.15.25

AirborneUnlimited-07.16.25

Airborne-FlightTraining-07.17.25

AirborneUnlimited-07.11.25

Tue, Jun 18, 2024

ScaleBirds Updates Followers on P-36 Development

LiteFighter Coming Along Nicely on Road to Market

ScaleBirds updated a watchful warbird fanbase on the current progress in bringing the LiteFighter to market, along with plans for the summer airshow season.

The LiteFighter P-36A Hawk is coming along quite nicely, with the first sets of tails, rudders, horizontal stabilizers, and elevators being built for early beta builders. ScaleBirds isn't totally done with the whole kit and kaboodle just yet, but they're sending out the elements they have squared away so builders can hit the ground running on their own builds. Currently, the team is focused on ramping up production in a way that will be resilient under larger loads, with Ide and crew focused on formalizing their drawing numbers, optimizing fixtures and jigs, developing build instructions, and identifying the most efficient builder path for buyers. A few more engineering and design changes are being added here and there as they learn more lessons from the prototype, particularly as they make more headway on building a retractible-gear version of the P-36A.

The LiteFighter will one day be much more than just a simple Curtiss Tomahawk homage, too, with its bones acting as the foundation for a whole range of warbird lookalikes in smaller scale. Off the bat, early additions will meander through the Tomahawk family, moving up to the P-40B Warhawk of Army Air Corps and Flying Tigers fame, or a P-40E Kittyhawk and its infamously oversized chin intake.

Between the Curtisses, about 90% of the airframe remains identical from one model to another, with most changes coming down to small details, fairings, and cowlings. Engine selection is pretty wide across the board, too, with the most historically faithful option being the Verner Scarlett 7U or 9S, offering big radial style and up to 158 horsepower. More economical options include the usual range from experimental and light sport units from ULPower, Viking, Continental, Jabiru, AeroMomentum, and Rotax. Ultimately, kits should take about 1,500 hours or thereabouts - ScaleBirds won't quite know for sure until they get more input from the beta builders, in any case. 

FMI: www.scalebirds.com

 


Advertisement

More News

ANN's Daily Aero-Term (07.15.25): Charted Visual Flight Procedure Approach

Charted Visual Flight Procedure Approach An approach conducted while operating on an instrument flight rules (IFR) flight plan which authorizes the pilot of an aircraft to proceed >[...]

Aero-News: Quote of the Day (07.15.25)

“When l became the Secretary of Defense, I committed to rebuild our military to match threats to capabilities. Drones are the biggest battlefield innovation in a generation, >[...]

ANN's Daily Aero-Linx (07.15.25)

Aero Linx: Stearman Restorers Association Welcome to the Stearman Restorers Association. The Stearman Restorers Association is an independent “Not for Profit” 501C-3 Co>[...]

NTSB Final Report: Kjelsrud Gary Kitfox

Airplane Exhibited A Partial Loss Of Engine Power When It Was About Halfway Down The Runway Analysis: The pilot of the experimental amateur-built airplane was departing from his pr>[...]

NTSB Prelim: Cessna A150L

The Flight Path Was Consistent With Low-Altitude Maneuvering On June 18, 2025, about 0922 mountain standard time, a Cessna A150L airplane, N6436F, was substantially damaged when it>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC