Flight Design Takes Its LSA Lead Seriously | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.14.25

Airborne-NextGen-07.15.25

AirborneUnlimited-07.16.25

Airborne-FlightTraining-07.17.25

AirborneUnlimited-07.11.25

Wed, Apr 18, 2007

Flight Design Takes Its LSA Lead Seriously

Company Notes 153 US Registrations

Big news at Sun 'N Fun this week continues to come from the light sport aircraft marketplace. While the category has yet to celebrate its third anniversary in the US,  several LSA manufacturers are taking positive steps towards establishing LSA's place in the future of general aviation.

Leading the charge is Flight Design USA, which also leads the category with a commanding 21% of the market, according to 153 US registrations through early April 2007. The company is trailed by American Legend at 13% (93 aircraft) and Evektor at 8% (54 aircraft) of all FAA registrations.

By way of comparison, a total of 49 models built by 38 companies have received their SLSA Airworthiness Certificate since the LSA Rule went into affect in July of 2004.

Flight Design reports more than 900 of its high-wing CT have been delivered worldwide since its introduction in 1997, with over 150 CTs registered as special light-sport aircraft in the USA.

The CT is a two-place, side-by-side airplane made of 98% carbon fiber, with a useful load of over 670 pounds. The powerplant is powered a 100-hp Rotax 912S engine and includes as standard equipment a BRS ballistic parachute.

Flight Design President Tom Peghiny tells ANN his company plans to retain its best-selling title. Company officials on both sides of the Atlantic have spent considerable time developing production capability, as well as building a distribution and service network in the US.

In addition, a standardized maintenance training program will be available to promote consistent technical programs on the Rotax engine and composite repair. The company will initially offer the course for Flight Design technicians in Berlin, but as the program develops plans are underway to bring the program over to the States.

FMI: www.flightdesignusa.com

Advertisement

More News

ANN's Daily Aero-Term (07.15.25): Charted Visual Flight Procedure Approach

Charted Visual Flight Procedure Approach An approach conducted while operating on an instrument flight rules (IFR) flight plan which authorizes the pilot of an aircraft to proceed >[...]

Aero-News: Quote of the Day (07.15.25)

“When l became the Secretary of Defense, I committed to rebuild our military to match threats to capabilities. Drones are the biggest battlefield innovation in a generation, >[...]

ANN's Daily Aero-Linx (07.15.25)

Aero Linx: Stearman Restorers Association Welcome to the Stearman Restorers Association. The Stearman Restorers Association is an independent “Not for Profit” 501C-3 Co>[...]

NTSB Final Report: Kjelsrud Gary Kitfox

Airplane Exhibited A Partial Loss Of Engine Power When It Was About Halfway Down The Runway Analysis: The pilot of the experimental amateur-built airplane was departing from his pr>[...]

NTSB Prelim: Cessna A150L

The Flight Path Was Consistent With Low-Altitude Maneuvering On June 18, 2025, about 0922 mountain standard time, a Cessna A150L airplane, N6436F, was substantially damaged when it>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC