AD: Airbus Canada Limited Partnership | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Mon, Jan 31, 2022

AD: Airbus Canada Limited Partnership

AD 2021-26-27 Requires A One-Time Inspection For Damage Of The Insulation Blankets Below The Left And Right OWEEDs

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes.

This AD was prompted by a report indicating that during production, the manual opening and closing of the over-wing emergency exit door (OWEED) prior to the installation of the OWEED interior panel could have resulted in damaged insulation blankets below the left and right OWEEDs. This AD requires a one-time inspection for damage of the insulation blankets below the left and right OWEEDs, and replacement if necessary, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective March 3, 2022.

Supplementary Information: TCCA, which is the aviation authority for Canada, issued TCCA AD CF-2021-03 on February 11, 2021 (TCCA AD CF-2021-03) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. The NPRM published in the Federal Register on August 3, 2021 (86 FR 41788). The NPRM was prompted by a report indicating that during production, the manual opening and closing of the OWEED prior to the installation of the OWEED interior panel could have resulted in damaged insulation blankets below the left and right OWEEDs. The NPRM proposed to require a one-time inspection for damage of the insulation blankets below the left and right OWEEDs, and replacement if necessary, as specified in TCCA AD CF-2021-03.

The FAA is issuing this AD to address potential damage to the insulation blankets, which could result in delayed passenger evacuation in the event of post-crash/post-impact fire events outside the airplane. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

NTSB Final Report: Aviat A1

Airplane Bounced About 3 Ft Then Touched Back Down And Then, With No Brakes Applied, The Airplane Began Veering To The Left Analysis: The pilot entered the airport traffic pattern >[...]

ANN's Daily Aero-Linx (07.08.25)

Aero Linx: British Microlight Aircraft Association (BMAA) The primary focus within all aviation activity is SAFETY. In all aspects of our sport SAFETY must come first, whether it b>[...]

Classic Aero-TV: Fly Corvair’s Reliable Engine Alternative

From SnF25 (YouTube Edition): William Wynne Builds Practical Aircraft Engines on the Corvair Platform Seeking an affordable alternative to the traditional aircraft engine options, >[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

Classic Aero-TV: CiES Fuel-Quantity and e-Throttle Systems Praised

From 2023 (YouTube Edition): Bridge of CiES CiES Inc. is a Bend, Oregon-based designer and manufacturer of modular embedded aircraft systems and sensors. The company’s fuel-l>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC