NTSB Final Report: Magniflight LLC M24 Orion Plus | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.16.25

Airborne-NextGen-06.17.25

AirborneUnlimited-06.11.25

Airborne-AffordableFlyers-06.12.25

AirborneUnlimited-06.06.25

Mon, Jun 16, 2025

NTSB Final Report: Magniflight LLC M24 Orion Plus

Pilot Was Unable To Maintain Altitude And Made A Forced Landing In Tall Grass, During Which The Gyroplane Rolled Over

Location: Dauphin Island, Alabama Accident Number: ERA23LA251
Date & Time: May 30, 2023, 11:01 Local Registration: N1777W
Aircraft: Magniflight LLC M24 Orion Plus Aircraft Damage: Substantial
Defining Event: Unknown or undetermined Injuries: 2 None
Flight Conducted Under: Part 91: General aviation - Personal

Analysis: The pilot of the gyroplane reported several lane warnings during the flight, which indicated possible disruptions to the fuel/ignition timing by the engine’s digital engine control unit (ECU). The ECU was comprised of two modules that worked in sync with each other to monitor numerous sensors throughout the engine. Although the pilot tried to reset the lane warning several times, the engine lost partial power. The pilot was unable to maintain altitude and made a forced landing in tall grass, during which the gyroplane rolled over and substantial damage. 

A postaccident examination and test run of the engine revealed no obvious mechanical malfunctions or failures that would have contributed to the accident. Data downloaded from the engine’s digital ECU and an electronic flight information system (EFIS) revealed that, at the time of the partial loss of engine power, the exhaust gas temperature (EGT) reading for the No. 4 cylinder dropped to levels indicating that combustion was no longer occurring within the cylinder. The loss of combustion in the No. 4 cylinder likely resulted in the partial power loss of the engine. 

The cause of the loss of combustion in the No. 4 cylinder could not be determined with the available engine ECU and EFIS data. Along with the engine data, the fact that the engine ran after the accident indicated there was likely an intermittent issue with the fuel/air delivery or the ignition to the No. 4 cylinder that could not be duplicated.

Probable Cause and Findings: The National Transportation Safety Board determines the probable cause(s) of this accident to be -- A partial loss of engine power due to a loss of combustion in the No. 4 cylinder for undetermined reasons.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (06.16.25): Wide-Area Augmentation System (WAAS)

Wide-Area Augmentation System (WAAS) The WAAS is a satellite navigation system consisting of the equipment and software which augments the GPS Standard Positioning Service (SPS). T>[...]

ANN's Daily Aero-Linx (06.16.25)

Aero Linx: International Republic Seabee Owner's Club (IRSOC) This site includes links to Specifications, Limits and History of the Republic Seabee. We are always searching for oth>[...]

NTSB Final Report: Magniflight LLC M24 Orion Plus

Pilot Was Unable To Maintain Altitude And Made A Forced Landing In Tall Grass, During Which The Gyroplane Rolled Over Analysis: The pilot of the gyroplane reported several lane war>[...]

ANN's Daily Aero-Linx (06.18.25)

Aero Linx: MQ-1B Predator The MQ-1B Predator is an armed, multi-mission, medium-altitude, long-endurance remotely piloted aircraft that is employed primarily as an intelligence-col>[...]

Airborne-NextGen 06.17.25: JetZero Finds A Home, VX4 eVTOL, H55’s B23 Energic

Also: Electric Aircraft Symposium, Radia Windrunner Avionics, AIRO Debut, NASA’s Orion Ready California-based aerospace start-up JetZero has formally selected Greensboro, Nor>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC