Tue, Sep 24, 2013
Capability Will Be Added To The Company's Columbus, MS Facility
Beginning in 2014, Eurocopter will install the necessary industrial capabilities to upgrade the American Eurocopter plant in Columbus, MS, to a final assembly and test site for Eurocopter AS350 helicopters.
The plan was developed with two main objectives in mind: First, as a way to offset the impact of the reduction in local production of UH-72A Lakota helicopters and second, to help provide a boost to sales in the U.S. market, especially with government and law enforcement agencies. “North America is the largest light helicopter market in the world for Eurocopter, and this new assembly line supports our industrial strategy by manufacturing the preferred AS350 ‘Made in the USA’ in close proximity to our customers,” said Joseph Saporito, Executive Vice President of the Global Supply Chain for Eurocopter. “This decision further supports our investments that have developed reliable and efficient local industrial capabilities in a market with strong expected growth.”
The plan calls for the Columbus plant to become a final AS350 assembly and test site using parts produced by Eurocopter and its suppliers, in addition to the continued production and retrofit of UH-72A Lakotas for the U.S. Army, other federal agencies and foreign military customers. Preparations will begin almost immediately, with the final assembly line scheduled to begin production in the fourth quarter of 2014. Operations are set to expand in 2015 and the plant will produce up to 60 additional helicopters annually by 2016.
The Columbus plant - American Eurocopter’s second location in addition to its headquarters in Grand Prairie, TX - is currently responsible for both the assembly and testing of the UH-72A Lakota aircraft, for which more than 280 aircraft have been delivered. Its teams also handle the partial assembly of the AS350 from kits for certification flight tests before sending the aircraft to completion centers, where they are installed with customer-specified interiors, instrumentation and special equipment.
More News
According To The Witness, Once The Airplane Landed, It Continued To Roll In A Relatively Straight Line Until It Impacted A Tree In His Front Yard On November 4, 2025, about 12:45 e>[...]
"In the frame-by-frame photos from the surveillance video, the left engine can be seen rotating upward from the wing, and as it detaches from the wing, a fire ignites that engulfs >[...]
Radar Required A term displayed on charts and approach plates and included in FDC NOTAMs to alert pilots that segments of either an instrument approach procedure or a route are not>[...]
From 2023 (YouTube Edition): It’s a Small World After All… Founded in 2011 by pilot, aircraft designer and builder, and U.S. Air Force veteran Sam Watrous, Uncasville,>[...]
Also: UFC Buys Tecnams, Emirates B777-9 Buy, Allegiant Pickets, F-22 And MQ-20 The NTSB's preliminary report on the UPS Flight 2976 crash has focused on the left engine pylon's sep>[...]
NTSB Prelim: Funk B85C
See All