NTSB Issues Recommendations To FAA Regarding STC Installers | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.21.25

Airborne-Unlimited-07.22.25

AirborneUnlimited-07.23.25

Airborne-Unlimited-07.24.25

AirborneUnlimited-07.25.25

Fri, May 25, 2012

NTSB Issues Recommendations To FAA Regarding STC Installers

Agency Should Offer Guidance On Compatibility Of Modifications

The NTSB has issued a set of recommendations to the FAA concerning the installation of STC modifications on aircraft. In its recommendation letter, the board cites several examples of accidents in which the STC modifications were made on aircraft but no compatibility check was performed to be sure there was no conflict between the mods.

The board recommends that the FAA develop specific guidance and/or a checklist to help installers performing supplemental type certificate (STC) modifications determine the compatibility  and interaction between a new STC and any previously installed STCs on the aircraft to ensure that the new STC will not adversely affect the aircraft's structural strength, performance, or flight characteristics. If the guidance and/or checklist indicate any adverse effects between the STCs, additional testing and/or an engineering evaluation should be performed before installing the new STC.

It also recommends that the FAA instruct installers to document in the Description of Work Accomplished block of Federal Aviation Administration Form 337 how the installer determined the compatibility and interaction between the new supplemental type certificate (STC) and previously installed STCs on the aircraft to show that the new STC will not adversely affect the aircraft's structural strength, performance, or flight characteristics.

Once the FAA develops specific guidance for installers performing supplemental type certificate (STC) modifications, as requested in Safety Recommendation A-12-21, (1) educate owners and operators of all aircraft with multiple STCs about the potential hazards of incompatible STCs; (2) encourage them to have their aircraft evaluated to determine if the multiple STCs adversely affect the aircraft's structural strength, performance, or flight characteristics; and (3) document any evaluation in FAA Form 337 for that aircraft.

FMI: Read The Recommendation Letter

Advertisement

More News

Airborne 07.21.25: Nighthawk!, Hartzell Expands, Deltahawk 350HP!

Also: New Lakeland Fly-in!, Gleim's DPE, MOSAIC! Nearly three-quarters of a century in the making, EAA is excited about the future… especially with the potential of a MOSAIC>[...]

ANN's Daily Aero-Term (07.27.25): Estimated (EST)

Estimated (EST) -When used in NOTAMs “EST” is a contraction that is used by the issuing authority only when the condition is expected to return to service prior to the >[...]

ANN's Daily Aero-Linx (07.27.25)

Aero Linx: Regional Airline Association (RAA) Regional airlines provide critical links connecting communities throughout North America to the national and international air transpo>[...]

NTSB Final Report: Luce Buttercup

The Airplane Broke Up In Flight And Descended To The Ground. The Debris Path Extended For About 1,435 Ft. Analysis: The pilot, who was the owner and builder of the experimental, am>[...]

Classic Aero-TV: 'That's All Brother'-Restoring a True Piece of Military History

From 2015 (YouTube version): History Comes Alive Thanks to A Magnificent CAF Effort The story of the Douglas C-47 named, “That’s all Brother,” is fascinating from>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC