Atlantis Cleared For Return To Earth | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Wed, Sep 20, 2006

Atlantis Cleared For Return To Earth

Inspection Reveals Nothing Amiss With Orbiter

Following the discovery of not one, but two mysterious objects floating in the vicinity of the shuttle Atlantis Tuesday, astronauts onboard STS-115 wrapped up inspections of the orbiter's heat shield early Wednesday morning.

And the verdict? Atlantis is cleared to land at Florida's Kennedy Space Center Thursday morning at 6:21 am EDT. The decision comes after engineers toiled overnight over pictures taken of the orbiter from a camera on the shuttle's robotic arm.

Shuttle program manager Wayne Hale told reporters at a 12:00 pm press conference that NASA may never know for certain what the debris was... but he did hazard a guess on the source of at least one of the objects seen floating near the shuttle.

Holding up a thin piece of plastic shimstock used to install the shuttle's ceramic tiles, Hale said images taken of the orbiter revealed one area where such a piece of plastic was evident prior to Tuesday's incident... but it's not there now.

Hale speculated the plastic strip was shaken loose during Tuesday's reaction thruster control test -- and reiterated that its absence in no way compromises the shuttle for its trip through the earth's atmosphere.

During the first inspection, the astronauts used cameras on the shuttle’s robotic arm to conduct the scans. Imagery specialists and engineers reviewed the data from today’s scan and from previous activities. They did not see any areas of concern from the first inspection.

The astronauts then attached the orbiter boom sensor system to the arm and performed additional inspections. The boom allowed engineers to inspect areas that could not be seen with the arm above. Specialists continue to analyze the data.

Mission managers decided to wave off STS-115 landing attempts today in order to allow the crew to inspect the orbiter. The extra scans are being used to ensure all of Atlantis’ critical equipment is in good shape for landing.

To get ready for landing, the crew may pack up gear and stow the Ku-Band antenna later today. The antenna is used for television coverage.

Forecasts for Thursday call for acceptable weather at the Florida landing site.

FMI: www.nasa.gov/shuttle

Advertisement

More News

ANN's Daily Aero-Term (05.17.24): Very High Frequency

Very High Frequency The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/ground voi>[...]

ANN's Daily Aero-Linx (05.17.24)

Aero Linx: Aviation Suppliers Association Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association, repre>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: ANN Visits Wings Over The Rockies Exploration Of Flight

From 2021 (YouTube Version): Colorado Campus Offers aVariety Of Aerospace Entertainment And Education Wings over the Rockies Exploration of Flight is the second location for the Wi>[...]

Airborne Affordable Flyers 05.16.24: PRA Runway, Wag-Aero Sold, Young Eagles

Also: Paramotor Champ's, Electric Ultralight, ICON BK Update, Burt Rutan at Oshkosh! The Popular Rotorcraft Association is reaching out for help in rebuilding their private runway >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC