AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-FlightTraining-07.10.25

AirborneUnlimited-07.11.25

Fri, Nov 09, 2018

AD: The Boeing Company Airplanes

AD NUMBER: 2018-22-10

PRODUCT: All The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F airplanes.

ACTION: Final Rule.

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2016-04-16, which applied to the aircraft listed above.

AD 2016-04-16 required adding design features to detect electrical faults and to detect a pump running in an empty fuel tank. This AD continues to require adding design features to detect electrical faults and to detect a pump running in an empty fuel tank.

This AD also provides optional terminating action for certain requirements. This AD was prompted by a fuel system review conducted by the manufacturer.

DATES: This AD is effective December 12, 2018.

COST: The FAA estimates that this AD affects 341 airplanes of U.S. registry. Operators may incur the following costs in order to comply with this AD:

  • Installing design features using a method approved by the FAA (retained actions from AD 2016-04- 16) - 152 work-hours × $85 per hour = $12,920. Parts $137,500. Cost per aircraft - $150,420.
  • Installing design features using service information (retained optional actions from AD 2016-04-16) - 98 work-hours × $85 per hour = $8,330. Parts - $109,000. Cost per aircraft - $117,330.

Estimated Costs for Optional Terminating Actions

  • Option 1: Replace connectors for Model DC10 and MD-10 (122 airplanes) - 68 work-hours × $85 per hour = $5,780. Parts - $54,842. Cost per aircraft - $60,622.
  • Option 1: Replace connectors for Model MD11 (124 airplanes) 59 work-hours × $85 per hour = $5,015. Parts - $67,031. Cost per aircraft - $72,046.
  • Option 2: Replace fuel pump housings for Model DC-10 and MD-10 (122 airplanes) Up to 81 work-hours × $85 per hour = $6,885. Parts - Up to $54,842. Cost per aircraft - Up to $61,727.
  • Option 2: Replace fuel pump housings for Model MD-11 (124 airplanes) Up to 77 work-hours × $85 per hour = $6,545. Parts -  Up to $67,031. Cost per aircraft - Up to $73,576.
FMI: AD

Advertisement

More News

Aero-News: Quote of the Day (07.11.25)

“Honored to accept this mission. Time to take over space. Let’s launch.” Source: SecTrans Sean Duffy commenting after President Donald Trump appointed U.S. Secret>[...]

ANN's Daily Aero-Term (07.11.25): Permanent Echo

Permanent Echo Radar signals reflected from fixed objects on the earth's surface; e.g., buildings, towers, terrain. Permanent echoes are distinguished from “ground clutter&rd>[...]

ANN's Daily Aero-Linx (07.11.25)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

NTSB Final Report: Schweizer SGS 2-33A

Glider Encountered A Loss Of Lift And There Was Not Sufficient Altitude To Reach The Airport Analysis: The flight instructor reported that while turning final, the glider encounter>[...]

NTSB Prelim: Aeronca 7AC

Airplane Climbed To 100 Ft Above Ground Level, At Which Time The Airplane Experienced A Total Loss Of Engine Power On May 24, 2025, at 1300 eastern daylight time, an Aeronca 7AC, N>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC