AD: Eclipse Aviation | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Mon, Jun 25, 2007

AD: Eclipse Aviation

AD NUMBER: 2007-13-11
MANUFACTURER: Eclipse Aviation
SUBJECT: Airworthiness Directive 2007-13-11
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for all Eclipse Aviation Corporation (Eclipse) Model EA500 airplanes. This AD requires you to incorporate information into the Limitations section of the airplane flight manual (AFM) that will require operation only in day visualflight rules (VFR), allow only a VFR flight plan, and maintain operation with two pilots. This AD is being issued because of three instances of loss of primary airspeed indication due to freezing condensation within the pitot system. The loss of air pressure in the pitot system could cause the stall warning to become unreliable and the stick pusher, overspeed warning, and autopilot to not function. The concern is heightened by the aerodynamic characteristics of the Eclipse Model EA500 airplane, which relies on the stall warning and the stick pusher to alert the pilot prior to the loss of aircraft control. The standby airspeed is reliable and not affected by this failure mode. Atemporary AFM revision prohibits operation in instrument meteorological conditions (IMC), requires two pilots, and limits the airspeed and altitude envelope if the event occurs in flight. The AFM limitations and FAA operational rules allow Model EA500 flight crews to file an instrumentflight rule (IFR) flight plan even though the airplane is not approved for flight in IMC. This potentially causes an undue workload burden and confusion when the pilot has to refuse any instructions that take them into IMC. We are issuing this AD to prevent an unsafe condition whenAir Traffic Control's (ATC's) ability to maintain traffic separation is compromised because anairplane on an IFR flight plan cannot accept a flight plan into IMC.

FMI: www.faa.gov/regulations_policies/airworthiness_directives/

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC