Rotax Announces ASTM Certification For Their New 912 iS | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Thu, Jul 26, 2012

Rotax Announces ASTM Certification For Their New 912 iS

Additional Certifications Are On The Way, Engine Management System By Rockwell Collins

By Anthony Liberatore

Officials from Rotax announced Tuesday at AirVenture that the new Rotax 912 iS Fuel Injected engine received ASTM (American Society for Testing and Materials) certification on July 16th. The ASTM Standard F2339-06 is the benchmark for design and manufacture for light sport aircraft.

Christian Mundigler, Manager of Rotax Aircraft Engines, said that with the same TBO as the current 912's the Si variant will enter the marketplace with a 2000 hr TBO. Some of the design features Mundigler noted were it is a 100 hp engine that weighs 140.2 pounds, and is has the ability to burn Mogas, Avgas, and E10. The iS also has a 20 percent improvement in fuel economy over the carburetor equipped 912's. This fuel economy increase can translate into much lower operating cost for an FBO in a training environment, up to $4,000 per 100 hrs flown. Other design improvements included  a redesigned oil pump, to a 6 chamber design.

But the major change is the iS being equipped with a  Digital Engine Control Unit (ECU) developed by Rockwell Collins. The redundancy of the Rockwell system integrating with this engine includes, dual fuel injectors per cylinder, dual ignition coils, as well as dual generators. To discuss their relationship with Bombardier BRP, Mundigler introduced Ben Russ from Rockwell Collins, who spoke of Rockwell's current aerospace markets and elaborated on the 912 iS's ECU.

To facilitate the integration of the 912 iS to airframes, Rotax can equip the 912 IS with their Power-Pac, which consist of a standardized exhaust system and a  tubular mounting suspension frame on the rear of the engine to simply motor mount design and attachments points to the existing airframe. The 912 iS is also compliant with current European noise reduction requirements.

Rotax is expecting the full production Type Certificate for the 912 iS in August, with FAR 33 Certification expected to come shortly thereafter.

(Pictured L-R Christian Mundigler, Ben Russ)

FMI: www.rotax.com


Advertisement

More News

ANN's Daily Aero-Linx (05.04.24)

Aero Linx: JAARS Nearly 1.5 billion people, using more than 5,500 languages, do not have a full Bible in their first language. Many of these people live in the most remote parts of>[...]

NTSB Final Report: Quest Aircraft Co Inc Kodiak 100

'Airplane Bounced Twice On The Grass Runway, Resulting In The Nose Wheel Separating From The Airplane...' Analysis: The pilot reported, “upon touchdown, the plane jumped back>[...]

Aero-News: Quote of the Day (05.04.24)

"Burt is best known to the public for his historic designs of SpaceShipOne, Voyager, and GlobalFlyer, but for EAA members and aviation aficionados, his unique concepts began more t>[...]

Aero-News: Quote of the Day (05.05.24)

"Polaris Dawn, the first of the program’s three human spaceflight missions, is targeted to launch to orbit no earlier than summer 2024. During the five-day mission, the crew >[...]

Read/Watch/Listen... ANN Does It All

There Are SO Many Ways To Get YOUR Aero-News! It’s been a while since we have reminded everyone about all the ways we offer your daily dose of aviation news on-the-go...so he>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC