Thu, Dec 31, 2020
AD 2020-26-20 Requires Inspecting The Air Extraction Duct Installation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes.
This AD was prompted by a report that during installation on the final assembly line, a foreign object damage (FOD) protective end cap was not removed from an extraction duct of the crew oxygen system. The protective end cap must be removed to prevent a build-up of oxygen under the flight deck floor, which is a fire risk. This AD requires inspecting the air extraction duct installation to determine if a protective end cap is installed, and removing any protective end cap found. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective February 3, 2021.
Supplementary Information: Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian AD CF-2020-19, dated May 26, 2020 (also referred to after this as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. You may examine the MCAI in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0683.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. The NPRM published in the Federal Register on August 11, 2020 (85 FR 48480). The NPRM was prompted by a report that during installation on the final assembly line, a FOD protective end cap was not removed from an extraction duct of the crew oxygen system. The protective end cap must be removed to prevent a build-up of oxygen under the flight deck floor, which is a fire risk.
The NPRM proposed to require inspecting the air extraction duct installation to determine if a protective end cap is installed, and removing any protective end cap found. The FAA is issuing this AD to address this possible ignition source, which could result in an oxygen-fed fire. See the MCAI for additional background information.
More News
Say Altitude Used by ATC to ascertain an aircraft's specific altitude/flight level. When the aircraft is climbing or descending, the pilot should state the indicated altitude round>[...]
Aero Linx: European Air Law Association (EALA) EALA was established in 1988 with the aim to promote the study of European air law and to provide an open forum for those with an int>[...]
From 2023 (YouTube Version): The Life, Death, Life, Death, and Life of a Glorious Warbird In 1981, business-owner Jim Tobul and his father purchased a Chance-Vought F4U Corsair. Mo>[...]
Also: USCG Retires MH-65 Dolphins, Irish Aviation Authority, NATCA Warns FAA, Diamond DA42 AD This summer, history enthusiasts will have a unique opportunity to experience World Wa>[...]
Also: WACO Kitchen Bails, French SportPlane Mfr to FL, Dynon-Advance Flight Systems, Innovation Preview Bobby Bailey, a bit of a fixture in sport aviation circles for his work with>[...]