AD 2022-05-14 Requires Repairing The Support Structure At The Attachment To The Attachment Bolts On Certain Flight Control Surfaces

The FAA is adopting a new airworthiness directive (AD) for all GROB Aircraft SE (type certificate previously held by GROB Aircraft AG) (GROB) Model G 115EG airplanes.

This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as in-flight detachment of a rudder actuator hinge bracket. This AD requires repairing the support structure at the attachment to the attachment bolts on certain flight control surfaces, inspecting the support structure at the attachment bolts of all flight control surfaces, and taking corrective actions if discrepancies are detected. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective March 24, 2022.

Supplementary Information: The FAA invites you to send any written data, views, or arguments about this final rule. Send your comments to an address listed under ADDRESSES. Include ¡§Docket No. FAA-2022-0152 and Project Identifier MCAI-2021-00254-A¡¨ at the beginning of your comments. The most helpful comments reference a specific portion of the final rule, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this final rule because of those comments.

Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to https://www.regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this final rule.

FMI: www.regulations.gov