EASA Orders Inspection Of All A380s | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Thu, Feb 09, 2012

EASA Orders Inspection Of All A380s

Inspections Of Affected Airplanes Have Led To A Broader EASA AD

EASA has expanded its mandatory inspection of wing rib feet on A380 airplanes to every aircraft in service, regardless of flight hours.

An AD posted by the European safety agency Wednesday mandates the inspection of "Airbus A380-841, A380-842, and A380-861 aeroplanes, all serial numbers."

The AD states:

Following an unscheduled internal inspection of an A380 wing, some rib feet have been found with cracks originating from the rib to skin panel attachment holes (Type 1 cracks according to Airbus All Operator Telex (AOT) terminology). Further to this finding, inspections were carried out on a number of other aeroplanes confirming the existence of these cracks. During one of those inspections, a new form of rib foot cracking originating from the forward and aft edges of the vertical web of the rib feet has been identified (Type 2 cracks according to Airbus AOT terminology).

This condition, if not detected and corrected, may lead to reduction of the structural integrity of the aeroplane.

EASA AD 2012-0013 required Detailed Visual Inspections (DVI) to detect cracks on the wing rib feet and required as well to repair them when applicable. Following issuance of EASA AD 2012-0013 it has been confirmed that Type 2 cracks may develop on other aeroplanes after a period of time of service. For the reasons described above, this AD, which supersedes EASA AD 2012- 0013, extends the applicability to all aeroplane serial numbers and requires accomplishment of High Frequency Eddy Current (HFEC) inspections of certain wing rib feet and accomplishment of applicable corrective actions.

This AD also requires that the inspection results are reported to Airbus.

This AD is considered to be a further interim action to address this condition. As a result of the on-going investigation, further mandatory actions may be necessary.

FMI: http://ad.easa.europa.eu/ad/2012-0026, www.airbus.com

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC