AD: Pacific Aerospace Limited Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Tue, Aug 25, 2020

AD: Pacific Aerospace Limited Airplanes

AD 2020-17-08 Describes The Unsafe Condition As Insufficient Electrical Bonding Of The Wing Lightning Protection Panels

The FAA is adopting a new airworthiness directive (AD) for Pacific Aerospace Limited Model 750XL airplanes with wing lightning protection panels installed.

This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as insufficient electrical bonding of the wing lightning protection panels. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective September 14, 2020.

Supplementary Information: The Civil Aviation Authority of New Zealand (CAA) has issued AD DCA/750XL/21, dated December 15, 2017 (referred to after this as “the MCAI”), to correct an unsafe condition for Pacific Aerospace Limited Model 750XL airplanes with wing lightning protection panels installed. To accompany the MCAI, the CAA issued Notification of Airworthiness Directive issued for New Zealand Aeronautical Products IAW ICAO Annex 8, dated December 15, 2017, which states: This [CAA] AD with effective date 22 December 2017 mandates an electrical bonding inspection of the wing lightning protection panels per the requirements in Pacific Aerospace Mandatory Service Bulletin (MSB) PACSB/XL/092 issue 2, dated 15 December 2017, or later approved revision.

The [CAA] AD is prompted by the possibility that there may be insufficient electrical bonding between the lightning protection panels and the airframe.

Due to a report of an airplane with wing lightning strike panels that were not bonded to the airframe and without information confirming whether the bonding was performed properly during the assembly process, a check of all airplanes in operation is necessary.

In addition to the inspection of the electrical bonding on the wing lightning protection panels, the MCAI also requires repair of any insufficient electrical bonding found during the inspection.

FMI: www.regulations.gov Docket No. FAA-2020-0769

Advertisement

More News

ANN's Daily Aero-Term (05.01.24): Say Altitude

Say Altitude Used by ATC to ascertain an aircraft's specific altitude/flight level. When the aircraft is climbing or descending, the pilot should state the indicated altitude round>[...]

ANN's Daily Aero-Linx (05.01.24)

Aero Linx: European Air Law Association (EALA) EALA was established in 1988 with the aim to promote the study of European air law and to provide an open forum for those with an int>[...]

Classic Aero-TV: Korean War Hero Twice Reborn

From 2023 (YouTube Version): The Life, Death, Life, Death, and Life of a Glorious Warbird In 1981, business-owner Jim Tobul and his father purchased a Chance-Vought F4U Corsair. Mo>[...]

Airborne 04.29.24: EAA B-25 Rides, Textron 2024, G700 Deliveries

Also: USCG Retires MH-65 Dolphins, Irish Aviation Authority, NATCA Warns FAA, Diamond DA42 AD This summer, history enthusiasts will have a unique opportunity to experience World Wa>[...]

Airborne Affordable Flyers 05.02.24: Bobby Bailey, SPRG Report Cards, Skydive!

Also: WACO Kitchen Bails, French SportPlane Mfr to FL, Dynon-Advance Flight Systems, Innovation Preview Bobby Bailey, a bit of a fixture in sport aviation circles for his work with>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC