Mon, Dec 23, 2013
Airbus Signs Mou With Honeywell And Safran For Development
As part of on-going research and development into future technology options, Airbus has signed a memorandum of understanding (MoU) with EGTS International, a joint venture company between Safran and Honeywell Aerospace, to further develop and evaluate an autonomous electric pushback and taxiing system for the A320 Family.
The agreement marks the selection of EGTS International’s Electric Green Taxiing System to be evaluated as a new option on the A320 Family – referred to by Airbus as eTaxi. This option would allow the aircraft to push-back from the gate without a tug, taxi-out to the runway, and return to the gate after landing without operating the main engines.
eTaxi will use the aircraft’s Auxiliary Power Unit (APU) to power electric motors fitted to the main landing gear wheels. The architecture will include the ability for pilots to keep full control from the cockpit over their aircraft’s speed and direction during taxi operations. “Through this agreement we are creating the ideal context to collaborate to best utilize our own landing gear systems expertise to develop a green taxiing solution for the A320 Family,” said Olivier Savin, EGTS Program Vice President, Safran.
“Following our demonstration of the technology at this year’s Paris Airshow, this MoU marks the next critical milestone in the advancement of the Electric Green Taxiing System as an option for Airbus’ A320 Family, by securing Airbus’ support in the development of the system. Airbus will provide extremely valuable insight to facilitate a seamless integration into the aircraft,” said Brian Wenig, EGTS Program Vice President, Honeywell Aerospace.
The eTaxi option will offer several operational and environmental benefits for the A320 Family:
- Per trip, the projected fuel savings and CO 2 reductions would be approximately four percent;
- It would contribute to significantly more efficient taxiing operations and save around two minutes of time on pushback;
- Taxiing-related carbon and nitrous oxide emissions would be cut by more than half.
Over the next few months the partners will jointly develop and present a global commercial case and implementation plan to determine the feasibility of an electric taxiing solution for the A320 Family. To this end, Airbus and EGTS International are reinforcing their existing teams to finalize validation studies, define specifications and converge on market requirements for a fully tailored forward-fit and retrofit technological solution.
(Image provided by Airbus)
More News
Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]
A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]
Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]
Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]
From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]