FAA Taps ITT, GE’s Naverus To Develop NextGen Procedures | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.03.24

Airborne-NextGen-06.04.24

Airborne-Unlimited-06.05.24 Airborne-AffordableFlyers-06.06.24

Airborne-Unlimited-06.07.24

Fri, May 11, 2012

FAA Taps ITT, GE’s Naverus To Develop NextGen Procedures

Companies Will Put Together RNP Approaches For Five U.S. Airports

The FAA is awarding a contract to ITT Corp. and GE’s Naverus to help accelerate the development of satellite-based procedures that will allow aircraft to fly more directly to their destinations. “NextGen will help deliver an environmentally friendly, more efficient traveling experience for the flying public,” said U.S. Transportation Secretary Ray LaHood.

Under the $2.77 million contract, ITT Corp., the prime contractor, and GE’s Naverus, the sub-contractor, will develop Required Navigation Performance (RNP) approach procedures into five airports: Ted Stevens Anchorage International, James M. Cox Dayton International, Kansas City International, General Mitchell International (Milwaukee) and Syracuse Hancock International. ITT Corp. and GE’s Naverus will be responsible for designing, implementing and maintaining a total of 10 procedures – two for each airport. The FAA will closely monitor the work to make sure all safety and environmental steps are conducted properly. This effort will supplement the FAA’s work to develop RNP procedures for airports across the country. The FAA has developed 305 RNP procedures.
 
“If you imagine highways in the sky, then these are high-speed off ramps,” said Acting FAA Administrator Michael Huerta. “Aircraft using RNP approaches make a more direct and efficient approach into the airport, also decreasing fuel burn.”
 
The FAA awarded the contract to ITT Corp. and GE’s Naverus through a competitive process under the System Engineering 2020 contract, a portfolio of work designed to help the agency roll out NextGen. Fiscal year 2012 appropriations included funding for a contractor to develop and deliver NextGen procedures, and the FAA reauthorization bill called for the agency to demonstrate the ability of a contractor to design, implement and maintain these procedures.

FMI: www.faa.gov

Advertisement

More News

ANN's Daily Aero-Term (06.10.24): Known Traffic

Known Traffic With respect to ATC clearances, means aircraft whose altitude, position, and intentions are known to ATC.>[...]

ANN's Daily Aero-Linx (06.10.24)

Aero Linx: Aviation Suppliers Association (ASA) Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association,>[...]

ANN's Daily Aero-Term (06.11.24): Abeam

Abeam An aircraft is “abeam” a fix, point, or object when that fix, point, or object is approximately 90 degrees to the right or left of the aircraft track. Abeam indic>[...]

ANN's Daily Aero-Linx (06.11.24)

Aero Linx: The Air Charter Safety Alliance The group, called the Air Charter Safety Alliance, will raise awareness of illegal charter flights among potential customers, charter bro>[...]

Aero-News: Quote of the Day (06.11.24)

“For months, ALPA has been sounding the alarm on the ongoing efforts by some aircraft manufacturers to remove pilots from the flight deck and replace them with automation. To>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC