Mon, Apr 02, 2018
Will Travel Around The Midwest And Southeast U.S. This Month
Garmin is pleased to announce the aviation team will be conducting customer in-flight demo’s with the GFC 500 digital autopilot. Throughout the month of April, Garmin will be visiting select locations throughout the Midwest and Southeastern U.S., offering demonstration flights of the cost-effective retrofit autopilot solution that brings unprecedented levels of capability, reliability and affordability to single-engine, fixed-wing general aviation aircraft.
Built upon the popular G5 electronic flight instrument, the GFC 500 autopilot uniquely integrates with the G5 to provide an economical and highly capable autopilot along with a modern flight instrument. The autopilot mode controller contains large dedicated keys and knobs, a control wheel that allows for easy adjustments to aircraft pitch, airspeed and vertical speed and a level button that returns the aircraft to straight-and-level flight. As a standard feature, pilots receive Garmin ESP with the GFC 500 autopilot, which works to assist the pilot in maintaining the aircraft in a stable flight condition.
The GFC 500 servos also contain a brushless DC motor and a gear train that eliminates the need for a mechanical slip clutch. G5 provides input and display of altitude preselect, heading, vertical speed target, airspeed target and Flight Director command bars for the GFC 500. An optional adapter allows the GFC 500 and G5 to interface with select Garmin GPS or VHF navigators. Several certification programs for the GFC 500 autopilot have been completed and additional aircraft types and models are in-progress and planned.
At each tour stop, Garmin experts will be on-site with the GFC 500-equipped Cessna 172 to answer questions and provide a first-hand look at the autopilot solution. All locations, dates and times are subject to change due to weather and maintenance.
Dates & Locations (Subject to change)
- April 2, 2018 Fayetteville, AR Drake Field Airport (KFYV) Wings Avionics
- April 3, 2018 Oklahoma City, OK Wiley Post Airport (KPWA) Turbine Aircraft Services
- April 4, 2018 Dallas, TX McKinney National Airport (KTKI) Select Avionics
- April 5, 2018 Houston, TX Conroe-North Houston Regional Airport (KCXO) Outright Avionics
- April 6, 2018 Smyrna, TN Smyrna Airport (KMQY) Carpenter Avionics
- April 10-15, 2018 Lakeland, FL Lakeland Linder Regional Airport (KLAL) Sun ‘n Fun Int’l Fly-In & Expo
- April 16, 2018 Gainesville, FL Gainesville Regional Airport (KGNV) University Air Center
- April 17, 2018 DeFuniak Springs, FL DeFuniak Springs Airport (54J) Monarch Aviation
- April 18, 2018 Augusta, GA Daniel Field Airport (KDNL) Augusta Aviation
- April 19, 2018 Griffin, GA Griffin-Spalding County Airport (6A2) Precision Avionics Specialist
- April 20, 2018 LaFayette, GA Barwick Lafayette Airport (9A5) Gann Aviation
- April 25, 2018 Omaha, NE Millard Airport (KMLE) Oracle Aviation
(Image provided with Garmin news release)
More News
With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]
Sierra Space Repositions Dream Chaser for First Mission
See All