FAA Issues Emergency AD For Some Sikorsky Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Sep 16, 2015

FAA Issues Emergency AD For Some Sikorsky Helicopters

Investigation Of An Accident Revealed A Failed Pushrod Assembly

The FAA has issued an emergency AD prompted by an accident involving a Sikorsky Aircraft Corporation Model S-76C helicopter. During preliminary investigation, a failed servo input control pushrod (pushrod) assembly was identified. Separation of the pushrod tube and the control rod end with bearing was found.

The EAD requires inspecting the main rotor (M/R) forward, aft, and lateral pushrod assemblies, the tail rotor (T/R) pushrod assembly, and the jamnuts, and applying slippage marks across the pushrod tubes and jamnuts. These EAD actions are intended to prevent loss of M/R or T/R flight control and subsequent loss of control of the helicopter.

The FAA issued the EAD after evaluating all the relevant information and determining the unsafe condition described previously is likely to exist or develop in other products of these same type designs.

Sikorsky issued Alert Service Bulletin No. 76-67-57, Basic Issue, dated September 10, 2015 (ASB), which specifies a one-time inspection of the M/R forward, aft, and lateral pushrod assemblies, the T/R pushrod assembly, and the jamnuts for proper installation, condition, and security. If a pushrod or jamnut does not meet criteria specified in the inspection, the ASB specifies replacing the assembly. The ASB also specifies applying two slippage marks across each M/R and T/R pushrod tube and jamnut. Further, the ASB references the applicable maintenance manual for a new recurring inspection of the slippage marks.

The EAD requires, within five hours time-in-service, inspecting each M/R and T/R pushrod assembly by inspecting the position of the control rod end in the pushrod tube. If the lockwire passes through the inspection hole, this EAD requires replacing the pushrod assembly. If the lockwire does not pass through the inspection hole, this EAD requires inspecting the jamnut to determine seating position against the pushrod and whether the jamnut can be turned with finger pressure. If the jamnut is not seated against the pushrod or is loose, this EAD requires replacing the pushrod assembly.

The EAD also requires, both for those pushrod assemblies that are replaced and for those that pass the inspections, applying two slippage marks across each M/R and T/R pushrod tube and jamnut.

The FAA says it considers this EAD to be an interim action as the accident investigation is ongoing. If additional action is later identified, the agency says it might consider further rulemaking.

FMI: EAD

Advertisement

More News

Aero-News: Quote of the Day (05.09.24)

"Fly-by-wire flight, coupled with additional capability that are being integrated into ALFA, provide a great foundation for Bell to expand on its autonomous capabilities. This airc>[...]

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Linx (05.09.24)

Aero Linx: B-21 Raider The B-21 Raider will be a dual-capable penetrating strike stealth bomber capable of delivering both conventional and nuclear munitions. The B-21 will form th>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC