Flight Design Takes Its LSA Lead Seriously | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Wed, Apr 18, 2007

Flight Design Takes Its LSA Lead Seriously

Company Notes 153 US Registrations

Big news at Sun 'N Fun this week continues to come from the light sport aircraft marketplace. While the category has yet to celebrate its third anniversary in the US,  several LSA manufacturers are taking positive steps towards establishing LSA's place in the future of general aviation.

Leading the charge is Flight Design USA, which also leads the category with a commanding 21% of the market, according to 153 US registrations through early April 2007. The company is trailed by American Legend at 13% (93 aircraft) and Evektor at 8% (54 aircraft) of all FAA registrations.

By way of comparison, a total of 49 models built by 38 companies have received their SLSA Airworthiness Certificate since the LSA Rule went into affect in July of 2004.

Flight Design reports more than 900 of its high-wing CT have been delivered worldwide since its introduction in 1997, with over 150 CTs registered as special light-sport aircraft in the USA.

The CT is a two-place, side-by-side airplane made of 98% carbon fiber, with a useful load of over 670 pounds. The powerplant is powered a 100-hp Rotax 912S engine and includes as standard equipment a BRS ballistic parachute.

Flight Design President Tom Peghiny tells ANN his company plans to retain its best-selling title. Company officials on both sides of the Atlantic have spent considerable time developing production capability, as well as building a distribution and service network in the US.

In addition, a standardized maintenance training program will be available to promote consistent technical programs on the Rotax engine and composite repair. The company will initially offer the course for Flight Design technicians in Berlin, but as the program develops plans are underway to bring the program over to the States.

FMI: www.flightdesignusa.com

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC