AD NUMBER: 2004-18-10
MANUFACTURER: Bombardier
SUBJECT: Airworthiness Directive 2004-18-10
SUMMARY: This amendment adopts a new airworthiness directive (AD), applicable to certain Bombardier Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 airplanes, that requires inspection of the fitting assemblies located on the vent and scavenge lines routed immediately below the fuel tank access covers on both wings for proper installation, and corrective actions if necessary. This amendment also requires inspection of the stiffeners on the underside of fuel tank access covers on both wings for signs of chafing damage caused by incorrect orientation of the lock wire tail, and removal of damage. This action is necessary to prevent contact between the lock wire pigtail of the fitting and the stiffener located on the inside surface of the fuel access covers of the wings, which could serve as a potential ignition source within the fuel tank if a cover is struck by lightning and result in possible fuel tank explosion. This action is intended to address the identified unsafe condition.

FMI: www.avantext.com/DailyADIndex.ASP?AD=20041810