TSB Releases Report In 2017 Collision With Runway Lights In Montreal | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Recent Daily Episodes

Episode Date

Airborne Unlimited-
Monday

Airborne-Unmanned w/AUVSI-
Tuesday

Airborne Unlimited-
Wednesday

AMA Drone Report-
Thursday

Airborne Unlimited-
Friday

Airborne On ANN

Airborne Unlimited-11-19-18

Airborne Unmanned-11-20-18

Airborne Unlimited-11.21.18

AMA Drone Report-11.15.18

Airborne Unlimited-11.16.18

Airborne-YouTube

Airborne Unlimited-11-19-18

Airborne Unmanned-11-20-18

Airborne Unlimited-11.21.18

AMA Drone Report-11.15.18

Airborne Unlimited-11.16.18

Tue, Jul 10, 2018

TSB Releases Report In 2017 Collision With Runway Lights In Montreal

Inadequate Flight Planning Led To To The Incident, Board Says

In its recently-release investigation report, the Transportation Safety Board of Canada (TSB) found that inadequate flight planning led to an aircraft colliding with runway lights after landing at the Montreal/St-Hubert Airport, Quebec.

On 15 May 2017, a U.S.-registered Bombardier Global Express aircraft was flying from Teterboro, New Jersey, to Montreal/St-Hubert Airport, Quebec, with three crew members and one passenger on board. The aircraft was cleared to land on Runway 06L at Montreal/St-Hubert Airport, which had been reduced in size to 75 feet wide and 5000 feet long due to construction work. At about 1055 local time, the aircraft touched down partially outside of the confines of the reduced-width runway, striking seven temporary runway edge lights. The pilot flying brought the aircraft back to the reduced-width runway centreline before coming to a stop 300 feet from the shortened runway end. There were no injuries but the aircraft sustained substantial damage.

The investigation found that the crew's flight planning did not adequately prepare them to ensure a safe landing. The flight crew believed that the entire width of the runway was available, despite notices to airmen (NOTAMs), communication with the air traffic controller and other information indicating the reduced runway size. Before landing, the flight crew misinterpreted the runway markings, and the pilot flying perceived the runway side stripe marking along the left edge of the runway as being the runway centreline. As a result, the aircraft touched down partly outside the limits of the available runway.

The approach briefing conducted by the flight crew did not include a review of the NOTAMs in effect at the airport, as required by the aircraft operator. This review could have made the crew aware of the reduced runway width prior to landing. If flight crews conduct incomplete approach briefings, there is a risk that information that is crucial for flight safety will be missed.

Following the occurrence, the operator of Montreal/St-Hubert Airport added a popup window to its website. It contained a message describing the construction work and specified that flight crews must read the notices to airmen in effect at the airport. Flight crews could also download a diagram of the construction work.

(Image provided with Transportation Safety Board of Canada report)

FMI: www.tsb.gc.ca, Full report

Advertisement

More News

AMA Drone Report 11.15.18: Hover 2!, Tello EDU Drone, ULC Attack

Also: UAS Waiver Report, Japan Document Delivery, Fluidity's FT Aviator, Lithium Metal Ion Batteries Zero Zero Robotics has released early details for their new 4K capable Hover 2,>[...]

Airborne-Unmanned 11.20.18: Solar-Powered Odysseus, QF-16 Delivered, FT Aviator

Also: Hover 2, TX Man Charged After Drone Shooting, ZF First In Germany, AviSight, Inc. Aurora continues its nearly 30-year legacy of advancing autonomous systems with Odysseus, a >[...]

Airborne-Unmanned 11.20.18: Solar-Powered Odysseus, QF-16 Delivered, FT Aviator

Also: Hover 2, TX Man Charged After Drone Shooting, ZF First In Germany, AviSight, Inc. Aurora continues its nearly 30-year legacy of advancing autonomous systems with Odysseus, a >[...]

Aero-Help Wanted: ANN REALLY Needs A Sales Pro

ANN/Airborne/Aero-TV Marketing Department Needs Part or Full Time Personnel E-I-C Note: For some reason, finding really motivated/honest/professional sales help has been a tough gi>[...]

ANN Wishes Our Readers, Listeners And Viewers A VERY Happy Thanksgiving Holiday

Yes... We Will Be On A Holiday Schedule For The Rest Of Week As the Aero-News staff observes the US holiday of Thanksgiving on Thursday, we wanted to let our readers know that ANN >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2018 Web Development & Design by Pauli Systems, LC