Sun, Jun 04, 2023
Airplane Impacted Cedar Trees And Terrain About 1,300 Feet Southwest Of The Center Of The Runway
Location: Ennis, TX Accident Number: CEN23FA173
Date & Time: May 6, 2023, 15:22 Local Registration: N6798T
Aircraft: Cessna 310D Injuries: 1 Fatal, 2 Serious
Flight Conducted Under: Part 91: General aviation - Personal
On May 6, 2023, at 1522 central daylight time, a Cessna 310D, N6798T, was destroyed when it was involved in an accident in Ennis, Texas. The pilot and front seat passenger were seriously injured, and the backseat passenger was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.
Automatic Dependent Surveillance – Broadcast (ADS-B) data revealed that the airplane departed David Wayne Hooks Memorial Airport (DWH), Houston, Texas, at 1424 and
proceeded to Ennis Municipal Airport (F41) and arrived at 1522. ADS-B data also revealed that the airplane began a descent on final approach for runway 16 at F41. After the airplane crossed the runway threshold, the flight track data showed the flight path shift to the right and the airplane began to climb on runway heading. The track data then showed the airplane veer to right.
The airplane impacted cedar trees and terrain about 1,300 feet southwest of the center of the runway. The impact path was on a southwest course, about 234° heading. A ground impact mark was located about halfway between the initial tree strike and the main wreckage and was consistent with the right wing and right engine impacting the ground first.
The airplane came to rest upright with the forward fuselage oriented on a southeast heading. The left and right wingtips were separate from the main wreckage. Most of the left wing, instrument panel, and forward and aft cabin area were consumed by fire. The right wing and empennage were intact and not burned. Except for the left aileron (consumed by fire), all primary and secondary control surfaces were intact and attached to the airplane, and control cable continuity was confirmed from each control surface to the cockpit.
More News
Circle To Runway (Runway Number) Used by ATC to inform the pilot that he/she must circle to land because the runway in use is other than the runway aligned with the instrument appr>[...]
Aero Linx: National Aviation Safety Foundation (NASF) The National Aviation Safety Foundation is a support group whose objective is to enhance aviation safety through educational p>[...]
At Altitude Of About 250-300 Ft Agl, The Airplane Experienced A Total Loss Of Engine Power On November 6, 2024, at 1600 central standard time, a De Havilland DHC-1, N420TD, was inv>[...]
From 2009 (YouTube Edition): Three Hour Flight Was 'Flawless' -- At Least, Until Mother Nature Intervened For anyone who loves the aviation business, this was a VERY good day. Afte>[...]
Also: AMA Names Tyler Dobbs, More Falcon 9 Ops, Firefly Launch Unsuccessful, Autonomous F-16s The Air Force has begun ground testing a future uncrewed jet design in a milestone tow>[...]
ANN's Daily Aero-Term (05.05.25): Circle To Runway (Runway Number)
See All