Canada TSB Releases Report In August 2014 Runway Incursion Incident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Wed, Dec 23, 2015

Canada TSB Releases Report In August 2014 Runway Incursion Incident

Watchlist Issue Of Risk Of Collisions On Runways Highlighted By Occurrence At Winnipeg International Airport

The Canadian Transportation Safety Board of Canada (TSB) Watchlist issue of risk of collisions on runways is highlighted in a report released by the TSB from its investigation report (A14C0112) into the August 2014 runway incursion at the Winnipeg James Armstrong Richardson International Airport in Winnipeg, Manitoba. There were no injuries, and no damage to aircraft or airport property.

On 4 August 2014, the ground controller at the Winnipeg International Airport cleared a WestJet DHC-8 operating as WestJet Encore Ltd. to taxi for departure via Runway 31 and to hold short of Runway 36. The DHC-8 crew acknowledged the clearance to hold short of Runway 36. The tower controller then observed that the DHC-8 had entered the Runway 36 protected area at the intersection of Runway 31. The tower controller then instructed a WestJet Boeing 737, which was on final approach for Runway 36, to conduct a go-around. The Boeing 737 followed the instructions to conduct a go-around, and subsequently landed without further incident.

The TSB investigation found that the hold-short line painted on Runway 31 was significantly degraded, with 123 feet of the line missing. The crew of the DHC-8 was actively looking for the hold-short line as the primary reference for the hold-short position and was slowing the aircraft. They did not see it and stopped in the runway protected area. The investigation also concluded that the daily airport inspections did not identify the degraded condition of the hold-short line, allowing the continued use of the hold-short position. Further, the orientation of the runway holding position signs was optimized for traffic on Runway 31, which likely contributed to the pilots not identifying the hold-short position.

The risk of collisions on runways has been identified as one of the risks to Canada's transportation system and is included on the TSB's 2014 Watchlist. The Board is calling for the implementation of improved procedures and enhanced collision warning systems at Canada's airports.

Following the occurrence, the Winnipeg Airport Authority Inc. (WAA) repainted the degraded hold-short line on Runway 31 and realigned the runway guard lights. The WAA has also incorporated new procedures for return to service inspections and computer-based inspection tracking software that contains checklists and intervals for inspections.

The TSB is an independent agency that investigates marine, pipeline, railway and aviation transportation occurrences. Its sole aim is the advancement of transportation safety. It is not the function of the Board to assign fault or determine civil or criminal liability.

(Source: TSB news release)

FMI: www.tsb.gc.ca

Advertisement

More News

Unfortunate... ANN/SportPlane Resource Guide Adds To Cautionary Advisories

The Industry Continues to be Rocked By Some Questionable Operations Recent investigations and a great deal of data has resulted in ANN’s SportPlane Resource Guide’s rep>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

ANN's Daily Aero-Term (04.29.24): Visual Approach Slope Indicator (VASI)

Visual Approach Slope Indicator (VASI) An airport lighting facility providing vertical visual approach slope guidance to aircraft during approach to landing by radiating a directio>[...]

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC