AD: Daher Aircraft Design, LLC | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.14.25

Airborne-NextGen-07.15.25

AirborneUnlimited-07.16.25

Airborne-FlightTraining-07.17.25

AirborneUnlimited-07.11.25

Tue, Jul 14, 2020

AD: Daher Aircraft Design, LLC

AD 2020-13-01 Requires A One-Time Inspection To Determine If An Affected NLG Fork Is Installed

The FAA is adopting a new airworthiness directive (AD) for all Daher Aircraft Design, LLC (type certificate previously held by Quest Aircraft Design, LLC), Model KODIAK 100 airplanes.

This AD was prompted by reports of cracks found in certain nose landing gear (NLG) forks. This AD requires a one-time inspection to determine if an affected NLG fork is installed, repetitive inspections of the affected NLG fork for cracks, repetitive inspections of the shimmy damper bracket for looseness, and of the shimmy damper system for damaged components if an affected NLG fork is installed, and rework/replacement of parts as necessary. The FAA is issuing this AD to address the  unsafe condition on these products. This AD is effective August 17, 2020.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Quest Aircraft Design, LLC (type certificate now held by Daher Aircraft Design, LLC), Model KODIAK 100 airplanes. The NPRM published in the Federal Register on March 8, 2018 (83 FR 9820). The NPRM was prompted by reports of cracks on the NLG fork on Model KODIAK 100 airplanes. The NPRM proposed to require a one-time inspection to determine if an affected NLG fork is installed, repetitive inspections of the affected NLG fork for  cracks, repetitive inspections of the shimmy damper bracket for looseness if an affected NLG fork is installed, and rework/replacement of parts as necessary. The FAA is issuing this AD to prevent separation of the NLG fork and consequent reduced control on landing. If the NLG fork separates on an unimproved surface, the risk of the NLG digging in and the airplane overturning on the ground increases.

Since the FAA issued the NPRM, the type certificate holder for the Model KODIAK 100 airplane changed from Quest Aircraft Design, LLC (Quest), to Daher Aircraft Design, LLC. This final rule reflects that change and updates the contact information to obtain service documentation.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (07.15.25): Charted Visual Flight Procedure Approach

Charted Visual Flight Procedure Approach An approach conducted while operating on an instrument flight rules (IFR) flight plan which authorizes the pilot of an aircraft to proceed >[...]

Aero-News: Quote of the Day (07.15.25)

“When l became the Secretary of Defense, I committed to rebuild our military to match threats to capabilities. Drones are the biggest battlefield innovation in a generation, >[...]

ANN's Daily Aero-Linx (07.15.25)

Aero Linx: Stearman Restorers Association Welcome to the Stearman Restorers Association. The Stearman Restorers Association is an independent “Not for Profit” 501C-3 Co>[...]

NTSB Final Report: Kjelsrud Gary Kitfox

Airplane Exhibited A Partial Loss Of Engine Power When It Was About Halfway Down The Runway Analysis: The pilot of the experimental amateur-built airplane was departing from his pr>[...]

NTSB Prelim: Cessna A150L

The Flight Path Was Consistent With Low-Altitude Maneuvering On June 18, 2025, about 0922 mountain standard time, a Cessna A150L airplane, N6436F, was substantially damaged when it>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC