Tue, Dec 29, 2020
AD 2020-26-13 Prompted By Seven Incidents Of Fatigue Cracks In The Horizontal Stabilizer Root Fitting
The FAA is adopting a new airworthiness directive (AD) for Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters.
This AD was prompted by seven incidents of fatigue cracks in the horizontal stabilizer root fitting FWD (forward root fitting). This AD requires establishing the life limit of certain part-numbered forward root fittings, establishing the life limit of certain part-numbered stabilizer strut fittings, repetitively inspecting certain parts, and depending on the inspection results, removing parts from service. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective February 1, 2021.
Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to Sikorsky Model S-92A helicopters with certain part-numbered horizontal stabilizer assemblies (stabilizer assembly), certain part-numbered forward root fittings, or certain part-numbered stabilizer strut fittings installed. The NPRM published in the Federal Register on September 17, 2020 (85 FR 58007). The NPRM was prompted by seven incidents of fatigue cracks in forward root fittings. Fatigue cracking in a forward root fitting degrades the load path and increases the load on other assembly parts, particularly at the aft horizontal stabilizer attachment points.
The NPRM proposed to require establishing the life limit of certain part-numbered forward root fittings and certain part-numbered stabilizer strut fittings. The NPRM also proposed to require repetitively inspecting each stabilizer assembly attachment bolt and barrel nut set, each forward root fitting, each attachment fitting including the bolt holes and fastener holes, condition of the fasteners, and each attachment fitting mating surface. Depending on the inspection results, the NPRM proposed to require removing parts from service. Finally, the NPRM proposed to prohibit installing certain stabilizer assemblies on any helicopter. The FAA is issuing this AD to address the unsafe condition on these products.
More News
Also: ALPA Warns, Aviation Meteorology Reference, Jennifer Homendy Re-Ups, CAF Tampa Bay The court has approved Van's Aircraft's bankruptcy reorganization plans, settling a stressf>[...]
Also: ALPA Warns, Aviation Meteorology Reference, Jennifer Homendy Re-Ups, CAF Tampa Bay The court has approved Van's Aircraft's bankruptcy reorganization plans, settling a stressf>[...]
Flameout Pattern An approach normally conducted by a single-engine military aircraft experiencing loss or anticipating loss of engine power or control. The standard overhead approa>[...]
Aero Linx: VC-25 - Air Force One The mission of the VC-25 aircraft — Air Force One — is to provide air transport for the president of the United States. The presidentia>[...]
We're Everywhere... Thanks To You! Even with the vast resources and incredibly far-reaching scope of the Aero-News Network, every now and then a story that should be reported on sl>[...]