AD: Cessna | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Jun 16, 2004

AD: Cessna

AD NUMBER: 2004-09-05
MANUFACTURER:
Cessna
SUBJECT: Airworthiness Directive 2004-09-05
SUMMARY: This amendment adopts a new airworthiness directive (AD); applicable to certain Cessna Model 500, 501, 550, and 551 airplanes; that requires a one-time inspection of the brake stator disks to determine to what change level they have been modified (if any), and related investigative and corrective actions if necessary. This AD also requires that the existing markings on the piston housing of certain brake assemblies be eliminated. The actions specified by this AD are intended to prevent wheel lockups that may be caused by cracked or broken brake stator disks becoming jammed in the brake assembly and preventing rotation. Such jamming of the brake assembly may result in reduced directional control or braking performance during landing. This action is intended to address the identified unsafe condition.This amendment adopts a new airworthiness directive (AD); applicable to certain Cessna Model500, 501, 550, and 551 airplanes; that requires a one-time inspection of the brake stator disks to determine to what change level they have been modified (if any), and related investigative and corrective actions if necessary. This AD also requires that the existing markings on the piston housing of certain brake assemblies be eliminated. The actions specified by this AD are intended to prevent wheel lockups that may be caused by cracked or broken brake stator disks becoming jammed in the brake assembly and preventing rotation. Such jamming of the brake assembly may result in reduced directional control or braking performance during landing. This action is intended to address the identified unsafe condition.

FMI: www.avantext.com/DailyADIndex.ASP?AD=20040905

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC