Martin County Commissioners Vote Tuesday On SUA Runway | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Feb 05, 2008

Martin County Commissioners Vote Tuesday On SUA Runway

Opponent Changes Her Mind On FAA Plan

Martin County commissioners could make a final decision Tuesday regarding the much-contested main runway at Witham Field (SUA.) But if they decide to fight the FAA ruling that would keep Witham from shortening runway 12/30... they may have to do so in court.

There's the possibility they might just find a way to play nice, as well. Commissioner Sarah Heard recently changed her mind regarding the installation of concrete pad "buffer areas" at the ends of the current the FAA offered as a solution, reports The Palm Beach Post, after voting earlier in favor of shortening the runway.

The initial estimated cost of 3.5 million for the buffer pads and the additional $5,000 for maintenance would have to be approved, but seems more likely than expanding the clear zone into the current location of the golf course.

The issues of noise and low-flying aircraft over local neighborhoods are not assessed in either current proposal. Cost and impact studies have left some unanswered questions for residents... and that leaves more than one county commissioner a little wary about Tuesday’s proceedings.

Runway length has been a point of contention since the runway was extended in 1998. Removal of the extension was shot down by the FAA originally in 2006, as ANN reported, though opponents have tried to work around the FAA's ruling.

The Witham Airport Action Majority suggests painting over the extension, and pushing the clear zone into the golf course, relocating at least one hole. That plan is similar to one put forth by the FAA in 1998; but county officials decided then to go the other direction. 

The golf course board president, Tom Kenney, doesn’t believe there is enough land to remodel if they lose a hole, fearing the intrusion would short-change them into a mini-course. Since the golf course shows up on the airport mapping, the FAA has a voice in what happens to the golf course.

The FAA has already invested in acquiring homes in the Runway Protection Zone, clearing airport departure zones so as not to have to shorten runway 12/30.

FMI: www.faa.gov, Martin County's Witham Field Site

Advertisement

More News

Aero-News: Quote of the Day (05.09.24)

"Fly-by-wire flight, coupled with additional capability that are being integrated into ALFA, provide a great foundation for Bell to expand on its autonomous capabilities. This airc>[...]

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Linx (05.09.24)

Aero Linx: B-21 Raider The B-21 Raider will be a dual-capable penetrating strike stealth bomber capable of delivering both conventional and nuclear munitions. The B-21 will form th>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC