Tue, Nov 02, 2021
AD 2021-23-03 Prompted By A Report Of Cracking Found On A Main Landing Gear (MLG) Drag Strut Assembly
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-400, -401, and -402 airplanes.
This AD was prompted by a report of cracking found on a main landing gear (MLG) drag strut assembly. This AD requires a records review to determine if an affected MLG drag strut assembly is installed, repetitive detailed inspections for cracking of affected strut assemblies, a one-time magnetic particle inspection for cracking, and on-condition actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective December 6, 2021.
Supplementary Information: Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued TCCA AD CF-2020-43, dated October 21, 2020 (referred to after this as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for certain De Havilland Aircraft of Canada Limited Model DHC-8-400, -401, and -402 airplanes. You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0613.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain De Havilland Aircraft of Canada Limited Model DHC-8-400, -401, and -402 airplanes. The NPRM published in the Federal Register on August 3, 2021 (86 FR 41794). The NPRM was prompted by a report of cracking found on an MLG drag strut assembly. The NPRM proposed to require a records review to determine if an affected MLG drag strut assembly is installed, repetitive detailed inspections for cracking of affected strut assemblies, a one-time magnetic particle inspection for cracking, and on-condition actions if necessary. The FAA is issuing this AD to address cracking of the MLG drag strut assembly and possible failure under compression loads during landing or ground operations, which could result in asymmetric MLG configuration and potential runway excursion. See the MCAI for additional background information.
More News
Known Traffic With respect to ATC clearances, means aircraft whose altitude, position, and intentions are known to ATC.>[...]
Aero Linx: Aviation Suppliers Association (ASA) Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association,>[...]
Abeam An aircraft is “abeam” a fix, point, or object when that fix, point, or object is approximately 90 degrees to the right or left of the aircraft track. Abeam indic>[...]
Aero Linx: The Air Charter Safety Alliance The group, called the Air Charter Safety Alliance, will raise awareness of illegal charter flights among potential customers, charter bro>[...]
“For months, ALPA has been sounding the alarm on the ongoing efforts by some aircraft manufacturers to remove pilots from the flight deck and replace them with automation. To>[...]