RS-25 Engine Test Advances SLS Progress | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Aug 20, 2016

RS-25 Engine Test Advances SLS Progress

Engine Ran For 420 Seconds Up To 111 Percent Rated Power

Additional testing of NASA’s Space Launch System (SLS) RS-25 development engine 0528 was recently completed at NASA Stennis Space Center in Mississippi. The engine ran for a duration of 420 seconds over power ranges from 80 to 111 percent rated power level.

Starting last year, Aerojet Rocketdyne resumed RS-25 engine testing to ensure that the engines will withstand the demanding operational environment required by SLS. After today’s test, three RS-25 engines have accumulated 5,468 seconds of test time and engine 0528 has been tested for 1,263 seconds.

“As a nation of explorers, we constantly look beyond the horizon, and Mars is the most logical place for humanity to expand our knowledge of the solar system,” said Aerojet Rocketdyne CEO and President Eileen Drake. “SLS, powered by four RS-25 engines, is just one of the six essential elements needed for an affordable journey to Mars.”

Aerojet Rocketdyne is supporting the propulsion and power requirements for the six elements for Mars: SLS; Orion; solar electric propulsion (SEP); deep space habitats; entry, descent and landing systems; and ascent vehicles. The capabilities exist today for each of these elements.

“For the nation to explore Mars, it is imperative to make each element as affordable as possible, which is why Aerojet Rocketdyne is targeting more than a 30 percent cost reduction in the RS-25 engine from the version that flew on the Space Shuttle,” according to Jim Paulsen, vice president for NASA programs at Aerojet Rocketdyne. “We are using the lessons learned from our test firings to further enhance our operational efficiency and reduce costs.”

Aerojet Rocketdyne is incorporating the latest advances in manufacturing, processing and materials into its expendable version of the RS-25 engine. Currently, the company has identified 45 components that are candidates for 3-D printing, which could reduce the overall engine manufacturing timeline by 25 percent by eliminating a significant number of welds needed to assemble the engine.

“Our engine testing at Stennis is moving us closer to powering the journey to Mars and introducing a new era of launch technology,” added Drake. “In addition to the RS-25 engine testing at Stennis, we also test our RS-68 engine for the Delta IV and the AR1 engine, which is eliminating our nation’s dependence on foreign engines for domestic launch vehicles.”

(Image provided with Aerojet Rocketdyne news release)

FMI: www.AerojetRocketdyne.com

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC