AD: Airbus SAS Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Fri, Apr 30, 2021

AD: Airbus SAS Airplanes

AD 2021-10-04 Prompted By A Potential Quality Issue In The Fuel Pump

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, and A321 series airplanes.

This AD was prompted by a potential quality issue in the fuel pump that includes a locking key of the impeller drive shaft found loose in the cavity under the impeller. This AD requires replacement of affected fuel pumps, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective April 29, 2021.

Supplementary Information: EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA Emergency AD 2021-0115-E, dated April 23, 2021 (EASA AD 2021-0115-E) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Airbus SAS Model A318, A319, A320, and A321 series airplanes. Model A320-215 airplanes, which are listed in the applicability of EASA AD 2021-0115-E, are not certificated by the FAA and are not included on the U.S. type certificate data sheet; this AD therefore does not include those airplanes in the applicability.

This AD was prompted by the identification of a potential quality issue found in the fuel pump that includes a locking key of the impeller drive shaft found loose in the cavity under the impeller. Incorrect installation of the locking key combined with a pump operation not fully immersed in fuel could compromise the fuel pump integrity. The FAA is issuing this AD to address this condition, which, in the case of operating a pump while not fully immersed in fuel, could create an ignition source in the fuel tank, and result in a fuel tank explosion and consequent loss of the airplane. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

Classic Aero-TV: Remembering Bob Hoover

From 2023 (YouTube Version): Legacy of a Titan Robert (Bob) Anderson Hoover was a fighter pilot, test pilot, flight instructor, and air show superstar. More so, Bob Hoover was an i>[...]

ANN FAQ: Follow Us On Instagram!

Get The Latest in Aviation News NOW on Instagram Are you on Instagram yet? It's been around for a few years, quietly picking up traction mostly thanks to everybody's new obsession >[...]

ANN's Daily Aero-Linx (05.15.24)

Aero Linx: B-52H Stratofortress The B-52H Stratofortress is a long-range, heavy bomber that can perform a variety of missions. The bomber is capable of flying at high subsonic spee>[...]

ANN's Daily Aero-Term (05.15.24):Altimeter Setting

Altimeter Setting The barometric pressure reading used to adjust a pressure altimeter for variations in existing atmospheric pressure or to the standard altimeter setting (29.92).>[...]

Aero-News: Quote of the Day (05.16.24)

"Knowing that we play an active part in bettering people's lives is extremely rewarding. My team and I are very thankful for the opportunity to be here and to help in any way we ca>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC