NTSB Prelim: Beech A36 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-Unlimited-05.28.24

Airborne-FlightTraining-05.29.24 Airborne-Unlimited-05.30.24

Airborne-Unlimited-05.24.24

Thu, Aug 03, 2023

NTSB Prelim: Beech A36

All Components Of The Airplane Were At The Accident Site

Location: Rayville, LA Accident Number: CEN23FA283
Date & Time: July 7, 2023, 00:23 Local Registration: N15RP
Aircraft: Beech A36 Injuries: 2 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On July 7, 2023, about 0023 central daylight time, a Beech A36, N15RP, was involved in an accident near Rayville, Louisiana. The airplane was destroyed. The private pilot and a passenger sustained fatal injuries. The airplane was operated under Title 14 Code of Federal Regulations Part 91.

A witness stated that she was asleep and was woken by a helicopter sound. The sound “immediately stopped” when there was a “bump” that “shook” the house, which she thought was thunder. She said the helicopter sound was a “whirly sound.” She said that her daughter looked at a phone and the time of the bump/shake.

The airplane was about 1 nm south of John H Hooks Jr Memorial Airport, Rayville, Louisiana. The airplane’s tail to nose heading was about 268o. Ground scarring and airplane damage was consistent with a nose-down, high-speed impact. Ground scarring began with two main landing gear wheel impressions separated by 7 ft and immediately forward was the impression of the wing leading edges. A 3 ft deep hole followed and preceded the aircraft tail by about 8 ft. The airframe was upright. The nose wheel strut and wheel were found in the hole. Wreckage debris extended about 50 ft forward of the aircraft nose and contained windscreen pieces and avionics.

All components of the airplane were at the accident site. The main landing gear was in the extended position. The wing flaps were in the retracted position. Flight control continuity was confirmed from the control surfaces to the cockpit. The left and right elevator trim tabs were relatively neutral to that of their elevators.

The airplane wreckage was retained for further examination.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (06.01.24): Hold For Release

Hold For Release Used by ATC to delay an aircraft for traffic management reasons; i.e., weather, traffic volume, etc. Hold for release instructions (including departure delay infor>[...]

ANN's Daily Aero-Linx (06.01.24)

Aero Linx: International Academy of Aviation and Space Medicine (IAASM) The Academy was founded in 1955, with the object of searching for and promoting new knowledge in Aviation an>[...]

Aero-News: Quote of the Day (06.01.24)

“As FedEx begins its journey to restructure under the ‘One FedEx’ strategy, our pilots remind management that there’s still unfinished business to address i>[...]

Airborne 05.31.24: 1Q GA Sales, 200th ALTO LSA, Spitfire Grounding

Also: NATA CEO In Legal Dilemma, WestJet Encore Settle, Drone Bill H.R. 8416, USN Jet Trainer GAMA released their 1Q/24 GA Aircraft Shipment and Billing Report -- with mostly mixed>[...]

ANN's Daily Aero-Term (06.02.24): Mach Technique [ICAO]

Mach Technique [ICAO] Describes a control technique used by air traffic control whereby turbojet aircraft operating successively along suitable routes are cleared to maintain appro>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC