AD: Gulfstream Aerospace Corporation Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Mon, Aug 08, 2022

AD: Gulfstream Aerospace Corporation Airplanes

AD 2022-16-04 Requires Inspecting The Horizontal Stabilizer Lower Skin...

The FAA is adopting a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation (Gulfstream) Model GV and GV-SP airplanes.

This AD was prompted by corrosion of the horizontal stabilizer lower bonded skin assemblies. This AD requires inspecting the horizontal stabilizer lower skin and associated bonded doublers and bonded stringers, repairing any area with corrosion beyond allowable damage limits, and incorporating revisions to the airworthiness limitations section (ALS) in the existing aircraft maintenance manual (AMM) or progressive maintenance program. The FAA is issuing this AD to address the unsafe condition on these products.  This AD is effective September 7, 2022.  The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of September 7, 2022.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Gulfstream Model GV and GV-SP airplanes. The NPRM published in the Federal Register on November 5, 2021 (86 FR 61088). The NPRM was prompted by bond line corrosion on Model GV and GV-SP airplanes, which causes disbonding between the horizontal stabilizer lower skin and associated bonded doublers and bonded stringers. Gulfstream determined that the existing visual inspection in the AMM did not reliably detect bond line corrosion and added a repetitive non-destructive testing (NDT) inspection to detect the damage. In the NPRM, the FAA proposed to require inspecting the horizontal stabilizer lower skin and associated bonded doublers and bonded stringers, repairing any area with corrosion beyond allowable damage limits, and incorporating revisions to the ALS in the existing AMM. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.05.24): Omnidirectional Approach Lighting System

Omnidirectional Approach Lighting System ODALS consists of seven omnidirectional flashing lights located in the approach area of a nonprecision runway. Five lights are located on t>[...]

Aero-News: Quote of the Day (05.05.24)

"Polaris Dawn, the first of the program’s three human spaceflight missions, is targeted to launch to orbit no earlier than summer 2024. During the five-day mission, the crew >[...]

Airborne 05.06.24: Gone West-Dick Rutan, ICON BK Update, SpaceX EVA Suit

Also: 1800th E-Jet, Uncle Sam Sues For Landing Gear, Embraer Ag Plane, Textron Parts A friend of the family reported that Lt. Col. (Ret.) Richard Glenn Rutan flew west on Friday, M>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Aero-News: Quote of the Day (05.06xx.24)

“Our aircrews are trained and capable of rapidly shifting from operational missions to humanitarian roles. We planned to demonstrate how we, and our BORSTAR partners, respond>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC