AD NUMBER: 2008-09-10
MANUFACTURER: Air Tractor
SUBJECT: Airworthiness Directive 2008-09-10
SUMMARY: The FAA is adopting a new airworthiness directive (AD) to supersede AD 2003-06-01, which applies to all Air Tractor, Inc. (Air Tractor) Models AT-300, AT-301, AT-302, and AT-400A airplanes that have aluminum spar caps; certain Air Tractor Models AT-400 airplanes that have aluminum spar caps; and all Models AT-300 and AT-301 airplanes that have aluminum spar caps and are or have been converted to turbine power. AD 2003-06-01 requires replacing the wing spar lower caps at a specified safe life limit; allows extending the safe life limit on certain airplanes if a wing lower spar cap splice rework is done; allows a limited time of continued operation beyond the safe life limit provided parts are ordered, the replacement is scheduled, and repetitive inspections reveal no cracks; and requires a report of any cracks found during any inspection to the FAA. This AD results from a recent report of cracks found on a Model AT-301 airplane at hours below the modification time specified in AD 2003-06-01. Consequently, this AD retains the wing spar lower cap replacement and reporting requirements from AD 2003-06-01 and adds a repetitive eddy-current inspection. We are issuing this AD to detect and correct cracks in the wing centerline splice joint. If not detected and corrected, these cracks could result in the wing separating from the airplane during flight.

FMI: www.faa.gov/regulations_policies/airworthiness_directives/