Aeroflex Introduces Programmable Attenuator Units | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.03.24

Airborne-NextGen-06.04.24

Airborne-Unlimited-06.05.24 Airborne-AffordableFlyers-06.06.24

Airborne-Unlimited-06.07.24

Sat, Mar 15, 2014

Aeroflex Introduces Programmable Attenuator Units

Single And Dual Channel Configurations In Half-Rack Enclosures

Aeroflex/Weinschel’s New Series of Programmable Attenuator Units represent a streamlined approach in programmable attenuation for bench test and subsystem applications. Standard 8320, 8321 and 8331 Series designs house and control various Aeroflex/Weinschel Programmable Attenuator Models (3200-XE, 3400, 150T, and 4200 Series) via front panel controls (8320 & 8321 only), Ethernet, USB and Serial communications interfaces. A GPIB (IEEE-488) interface is also available as an option on Models 8320 and 8321 only.

The 8320 series are single or dual channel configurations housed in half rack enclosures. The 8321 series are multi-channel configurations housed in 19 inch enclosures and can be configured for up to 12 attenuation channels. Both series can be configured with RF connectors on the front or rear of the unit. Through (front to rear) configurations are available only for 8321 Series. Model 8331 Series offers a lower cost solution for automated bench test and subsystem applications.

Most 8331 Series are multi-channel configurations where RF signal is routed through either the front or rear mounted ports. This series can be configured for up to 12 independent channels of attenuation and can be controlled via Ethernet, USB and Serial communications interfaces.

Labview based Attenuator Control Center Software (ACCS) is included and can be used in conjunction with the operation of this series of programmable attenuator units and allows the user to setup, control and perform test and measurements over standard communication interfaces.

Aeroflex/Weinschel also provides custom subsystems where a variety of test configurations can be incorporated within a single unit.

(Image provided by Aeroflex)

FMI: www.aeroflex.com

Advertisement

More News

ANN's Daily Aero-Term (06.10.24): Known Traffic

Known Traffic With respect to ATC clearances, means aircraft whose altitude, position, and intentions are known to ATC.>[...]

ANN's Daily Aero-Linx (06.10.24)

Aero Linx: Aviation Suppliers Association (ASA) Established February 25, 1993, the Aviation Suppliers Association (ASA), based in Washington, D.C., is a not-for-profit association,>[...]

ANN's Daily Aero-Term (06.11.24): Abeam

Abeam An aircraft is “abeam” a fix, point, or object when that fix, point, or object is approximately 90 degrees to the right or left of the aircraft track. Abeam indic>[...]

ANN's Daily Aero-Linx (06.11.24)

Aero Linx: The Air Charter Safety Alliance The group, called the Air Charter Safety Alliance, will raise awareness of illegal charter flights among potential customers, charter bro>[...]

Aero-News: Quote of the Day (06.11.24)

“For months, ALPA has been sounding the alarm on the ongoing efforts by some aircraft manufacturers to remove pilots from the flight deck and replace them with automation. To>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC